Description

Key Features

Reach Tight Spots

The FastCap Long Nose Marker is built to mark where a regular marker cannot reach. Its extended nose helps you get into holes, corners, cabinet edges, and other layout spots without guessing.

Two Useful Tips

A fine point handles precise layout work, while the wide chisel tip covers general marking. That gives you one marker for detailed tracing and quick jobsite marks.

Permanent Waterproof Ink

The black ink is permanent and waterproof, so your layout lines hold up during handling and shop work. Good when you need marks that stay visible on wood, metal, plastic, or cardboard.

Overview

The FastCap Long Nose Marker is a specialty layout marker made for woodworkers, cabinet installers, trim carpenters, and anyone who needs to mark in places a standard marker cannot reach. This is a long nose marker designed for marking inside holes, along walls, inside cabinets, and around tight corners. Model Number: LONG NOSE MARKER. If your work involves transferring lines into deep recesses or tracing tight inside edges, this tool solves a real problem quickly.

What makes this marker useful is the extended marking nose and dual-tip design. Source data shows a fine tip point for precision work and a wide chisel tip for general marking. In practice, that means you can use the fine point when you need control for tight layout lines, angle tracing, or Kaizen Foam cutouts, then flip to the broader tip when you just need a bold, visible mark on stock or sheet goods.

The reach is the whole point here. FastCap lists the product as having extra-long reach for deep holes and tight spots, and other provided data calls out that it is great for marking inside holes and hard-to-access places. That matters on real jobs because it lets you transfer a mark directly instead of trying to estimate from the edge or use a pencil that is too short or too thick for the opening.

The FastCap Long Nose Marker also uses permanent, waterproof black ink. That makes it a better fit for shop and jobsite layout than a standard office marker. If you are marking wood, plastic, metal, or cardboard for cutting, drilling, or fitting, you want a line that stays put while parts are being moved around. This marker is built for that kind of use.

From a design standpoint, this is a straightforward specialty hand tool with features that actually help on the bench and on site. The removable pocket clip makes it easier to keep close, and the long, narrow nose gives you access where bulky marker bodies usually get in the way. It is a simple idea, but it is the kind of simple tool that saves time because it lets you mark the exact spot the first time.

This FastCap marker is a smart buy for woodworking layout, cabinetry, punch-list work, fixture fitting, and custom organization projects like Kaizen Foam. It is especially useful for users who regularly trace interior corners, transfer dimensions into recessed areas, or need a permanent marker for tight-access marking. If that sounds like your kind of work, this is one of those small tools that earns its spot fast.

Mark Where Regular Markers Cannot

The long nose is what separates this marker from the throwaway markers rolling around in a toolbox. It gives you direct access to inside corners and narrow recesses, so your mark lands where the cut, hole, or fit actually needs to happen.

• Built for marking tight places, inside holes, and hard-to-reach layout points
• Helpful for tracing angles and working along walls or cabinet interiors

Fine Detail and Bold Layout in One Marker

You do not always need the same kind of line. This marker gives you a fine point for precise work and a wider chisel tip for general marking, which makes it more useful than a single-purpose layout pen.

• Fine tip point supports precise marking and detailed tracing
• Wide chisel tip makes larger, easy-to-see layout lines

What’s in the Box

• (1) FastCap Long Nose Marker

Key Specifications

Tool Type	Long nose marker
Pack Size	1
Ink Color	Black
Ink Type	Permanent
Water Resistance	Waterproof
Fine Tip Reach	1-1/8 in.
Long Reach	Up to 1-7/8 in.
Surface Use	Wood, metal, plastic, cardboard

Built For

Woodworking Cabinet Installation Trim Carpentry Layout Work Marking Inside Holes Angle Tracing Kaizen Foam Layout General Contracting

Pro Tip

Use the fine point first to trace your exact line in inside corners or Kaizen Foam, then switch to the chisel tip if you need a bolder mark that is easier to see during cutting or fitting. That keeps your accuracy without losing visibility.

Tool Nut’s Take

Tool Nut’s Take

FastCap Long Nose Marker solves a small problem that wastes a lot of time

The FastCap Long Nose Marker is one of those simple specialty tools that makes immediate sense the first time you need to mark deep inside a corner or hole.

• Who it’s for: Woodworkers, cabinet guys, trim installers, and anyone doing precise layout in tight spaces.
• Why it stands out: The long reach, fine point, and wide chisel tip give it more real-world usefulness than a standard permanent marker.
• Worth knowing: This is a single marker, not a multi-pack, and its value is in access and precision more than everyday rough marking.

Common Questions

• Is this a permanent marker? Yes. Provided product data identifies it as a permanent marker.
• Is the ink waterproof? Yes. The supplied product information states the marker is waterproof.
• What makes it different from a regular marker? The long nose is designed for marking tight places, inside holes, corners, and other recessed areas that standard marker bodies cannot access easily.
• Does it have more than one tip style? Yes. Provided data indicates a fine tip point for precision and a wide chisel tip for general use.