Screwdriver


Screws


Driver Bit


Structural Connector


Drill Bit

determinedz

Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown - Image 1
Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown - Image 2
Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown - Image 3
Product on sale
Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown - Image 1Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown - Image 2Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown - Image 3

Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown

Original price was: $91.99.Current price is: $23.00.

Can be installed on roof pitches up to 8:12 or on a bottom chord designed to transfer the load Screw holes are configured to allow for double installation on a two-ply (minimum) truss When installed on trusses with no overhangs, specify VGTR/L Install washer component (provided) so that top of washer is horizontal as well…

Checkout

Description

  • Can be installed on roof pitches up to 8:12 or on a bottom chord designed to transfer the load
  • Screw holes are configured to allow for double installation on a two-ply (minimum) truss
  • When installed on trusses with no overhangs, specify VGTR/L
  • Install washer component (provided) so that top of washer is horizontal as well as parallel with top of wall top plate
  • Made from 7-gauge steel
  • Galvanized (G90) for extra corrosion resistance

The Variable Girder Tiedown (VGT) is a higher capacity alternative to the LGT and MGT for girder trusses. It attaches with Simpson Strong-Tie Strong-Drive screws (included) to the side of truss and features a predeflected crescent washer that allows it to accommodate top chord pitches up to 8:12. The VGT is also available with one flange concealed for attachment to trusses with no tail.

  • Can be installed on roof pitches up to 8:12 or on a bottom chord designed to transfer the load
  • Screw holes are configured to allow for double installation on a two-ply (minimum) truss
  • When installed on trusses with no overhangs, specify VGTR/L
  • Install washer component (provided) so that top of washer is horizontal as well as parallel with top of wall top plate
  • Made from 7-gauge steel
  • Galvanized (G90) for extra corrosion resistance

Install With: Install with 1/4 in. x 3 in. Strong-Drive SDS Heavy-Duty Connector screws (included) and 1/2 in. diameter anchor bolts

Reviews

There are no reviews yet.

Be the first to review “Simpson Strong-Tie VGT VGT 7-Gauge Variable Girder Tiedown”

Your email address will not be published. Required fields are marked *

Related products

  • Product on sale
    Simpson Strong-Tie WP414 WP Welded Top-Flange Joist Hanger for 4×14

    Simpson Strong-Tie WP414 WP Welded Top-Flange Joist Hanger for 4×14

    Original price was: $36.99.Current price is: $11.10.
  • Product on sale
    Simpson Strong-Tie VGTR VGT 7-Gauge Variable Girder Tiedown, Right Conceal

    Simpson Strong-Tie VGTR VGT 7-Gauge Variable Girder Tiedown, Right Conceal

    Original price was: $101.99.Current price is: $20.40.
  • Product on sale
    Simpson Strong-Tie Z44 2-1/2-in. x 3-1/2-in. 12-Gauge Galvanized Z Clip

    Simpson Strong-Tie Z44 2-1/2-in. x 3-1/2-in. 12-Gauge Galvanized Z Clip

    Original price was: $12.99.Current price is: $3.90.
  • Product on sale
    Simpson Strong-Tie WP212-2 WP Welded Top-Flange Joist Hanger for Double 2×12

    Simpson Strong-Tie WP212-2 WP Welded Top-Flange Joist Hanger for Double 2×12

    Original price was: $34.99.Current price is: $10.50.
  • Product on sale
    Simpson Strong-Tie WT8-R50 Wedge Tie for 2x Formboard, 8-in. Thick Walls, 50-Pack

    Simpson Strong-Tie WT8-R50 Wedge Tie for 2x Formboard, 8-in. Thick Walls, 50-Pack

    Original price was: $66.99.Current price is: $16.75.