Description

Key Features

316 Stainless Build

Made from stainless steel for strong corrosion resistance in treated lumber, wet jobsites, coastal work, docks, and other harsh environments where standard galvanized hardware is not the right choice.

Double-Shear Strength

The double-shear nailing pattern spreads load through two points on each joist nail, which helps increase connection strength while using fewer nails than many conventional joist hanger layouts.

Fast Positioning

Speed prongs help hold the hanger in place before full fastening, which makes layout and installation quicker when you are setting repeated joist connections in framing work.

Overview

The Simpson Strong-Tie LUS28SS Stainless-Steel Face-Mount Joist Hanger for 2×8 is a face-mount joist hanger built for supporting a nominal 2×8 joist in wood framing. This is a joist hanger designed for securing a 2×8 joist to a header or beam in structural framing. Model Number: LUS28SS. If you are framing decks, exterior structures, docks, pergolas, or other projects where moisture and corrosion matter, this stainless steel hanger gives you the connection strength of the LUS design with better long-term durability than standard zinc-coated hardware.

What makes this hanger matter is the combination of corrosion resistance and installation efficiency. Simpson’s LUS series is known for speed prongs and double-shear nailing. In practical terms, the prongs help temporarily locate the hanger so you can keep moving during layout, and the double-shear design helps drive load through the connection more effectively with fewer nails than a typical straight-nailed hanger pattern. On a job with a pile of joists to hang, that saves time without giving up structural performance.

The LUS28SS is built from 18-gauge stainless steel and sized specifically for a nominal 2×8 member. It measures 1-9/16 in. wide, 6-5/8 in. high, with a 1-3/4 in. seat. Those dimensions matter because they tell you this is a standard single-member hanger, not a wider double hanger or a heavy concealed option. It is meant for straightforward face-mount framing where you need a clean, code-recognized connector for common lumber sizes.

Load ratings are one of the real buying decisions with a framing connector, and this model is tested, load rated, and code compliant within the LUS series. For the LUS28SS, published allowable loads include up to 1,100 lb floor load and 1,360 lb roof load in DF/SP conditions, with lower but still substantial published values for SPF/HF applications. That gives builders a connector that is practical for real framing work, not just light trim or decorative use. As always with structural hardware, the listed loads depend on using the specified fasteners and installation method.

This hanger is also a strong fit for treated lumber and harsh exposure conditions. Supplementary product data specifically notes it is suitable for treated lumber and calls out Type 316 stainless steel fasteners for installation. That is a big deal for exterior framing, marine work, pool enclosures, fences, and any build where moisture or chemical exposure can chew through the wrong connector over time. If the rest of your hardware package is stainless, this hanger keeps the connection consistent.

In day-to-day use, the LUS28SS is about making common framing connections easier to repeat accurately. Face-mount installation keeps the process familiar. Angled joist nailing helps in tighter spaces, and Simpson notes that joist nails must be driven at an angle through the joist or truss into the header to achieve published table loads. It is also worth noting that this hanger cannot be modified, and it is not designed for welded or nailer applications. That is not a drawback so much as a reminder that structural connectors only perform as rated when installed exactly as engineered.

Who should buy it? Contractors and serious DIYers building exterior decks, framing additions, pergolas, dock work, fencing, or repairs in corrosive environments. If your project uses nominal 2×8 members and calls for stainless hardware, the Simpson Strong-Tie LUS28SS Stainless-Steel Face-Mount Joist Hanger for 2×8 is the right kind of connector: common size, proven load path, and much better suited to wet or treated-lumber conditions than a basic galvanized hanger.

Built for Wet and Corrosive Environments

If you are framing outdoors, the material matters as much as the shape. This stainless steel joist hanger is made for conditions where standard coated connectors can become the weak link over time.

• Stainless steel construction for corrosion resistance in exposed framing
• Suitable for treated lumber and moisture-prone applications
• Good fit for decks, docks, pergolas, pool enclosures, and other exterior wood structures

Faster Repeats on Framing Layout

The LUS design is popular for a reason: it is straightforward to place, fasten, and repeat. That matters when you have a full run of joists and do not want every connection slowing down the build.

• Speed prongs help temporarily position and hold the hanger before final fastening
• Face-mount design keeps installation familiar for deck and general framing work
• Angled joist nailing helps when access is tighter around headers and beams

Strength Comes from the Nailing Pattern

This connector is not just bent metal. The shape and hole layout are engineered around Simpson’s double-shear concept so the connection carries load the way the published tables intend.

• Double-shear nailing design provides greater strength with fewer nails
• Published allowable loads include up to 1,100 lb floor and 1,360 lb roof in DF/SP conditions
• Use all specified fasteners and installation methods to achieve rated performance

What’s in the Box

• (1) Simpson Strong-Tie LUS28SS stainless-steel face-mount joist hanger for 2×8

Fasteners are not included.

At a Glance

18 Ga.

Steel Thickness

6-5/8 in.

Overall Height

1,100 lb

DF/SP Floor Load

1,360 lb

DF/SP Roof Load

Key Specifications

Mount Type	Face Mount
Material	Stainless Steel
Joist Size	Nominal 2×8
Gauge	18 ga.
Width	1-9/16 in.
Height	6-5/8 in.
Seat Depth	1-3/4 in.
DF/SP Floor Load	1,100 lb

Compatibility

Wood Member Size

Sized for nominal 2×8 joists in face-mount wood framing connections.

Required Fasteners

Use specified stainless steel fasteners. Published data for LUS28SS lists 6-SS10d header fasteners and 4-SS10d joist fasteners in the load table.

Material Pairing

Appropriate for treated lumber and corrosion-prone applications where stainless steel hardware is required.

Built For

Deck Framing General Framing Remodeling Construction Marine Pergolas & Outdoor Structures Pool Enclosures & Fencing DIY / Hobbyist

Pro Tip

Do not swap in whatever nails are on the truck. With the LUS28SS, the published loads depend on the specified stainless fasteners and the angled joist nailing pattern, so if you want the hanger to perform like the table says, install it exactly that way.

Tool Nut’s Take

Tool Nut’s Take

Simpson Strong-Tie LUS28SS Stainless-Steel Face-Mount Joist Hanger for 2×8 Gets the Job Done Without Drama

If you are hanging 2x8s in a wet, treated, or coastal environment, this is the kind of connector you buy once and stop worrying about.

• Who it’s for: Builders, deck crews, remodelers, and serious DIYers who need a stainless steel joist hanger for nominal 2×8 framing.
• Why it stands out: You get the proven LUS double-shear design, speed-prong convenience, and stainless steel corrosion resistance in one of the most common framing sizes.
• Worth knowing: This hanger cannot be modified, and the fastener schedule is not optional if you want the rated loads. Buy the right stainless nails with it.

Common Questions

• What size member is this hanger made for? It is sized for a nominal 2×8 joist in a face-mount wood framing connection.
• Can this hanger be used with treated lumber? Yes. Supplementary product data identifies it as suitable for treated lumber, and the stainless steel construction makes it a better fit for corrosive conditions.
• Can the hanger be bent or modified to fit? No. Simpson states that LUS hangers cannot be modified.
• What fasteners does it require? The load table for LUS28SS lists 6-SS10d fasteners at the header and 4-SS10d fasteners at the joist. Use the specified stainless fasteners and all required nail locations.