Description

Key Features

Semi-Automatic Cycling

The semi-automatic firing action keeps the Simpson Strong-Tie PT-27 Powder-Actuated Fastening Tool moving from shot to shot, which helps speed up repetitive fastening without adding extra steps between fasteners.

Broad Fastener Range

It handles fastener lengths from 1/2 inch to 2 1/2 inches, plus 3 inch washered fasteners, so one tool covers a wide mix of common direct fastening jobs.

Built for Daily Use

At 5 lb 4 oz and engineered for continuous use with low maintenance, this tool is set up for crews that need dependable fastening on real jobsites, not occasional one-off use.

Overview

The Simpson Strong-Tie PT-27 Powder-Actuated Fastening Tool is a semi-automatic general-purpose direct fastening tool built for attaching materials in wood and residential construction applications. This is a powder-actuated fastening tool designed for general fastening into base materials such as concrete and concrete masonry units. Model Number: PT-27.

What matters most with a tool like this is range and consistency, and the PT-27 covers both. It accepts fastener lengths from 1/2 inch to 2 1/2 inches, with support for 3 inch washered fasteners, so it can handle light attachment work and thicker assemblies without forcing you into a narrower fastener setup. It is also compatible with .300 inch or 8 mm-headed fasteners as well as 1/4 inch-20 threaded studs, which gives it flexibility across common fastening tasks.

The semi-automatic firing action is a practical advantage when you are doing repetitive fastening. Instead of treating every shot like a reset-heavy process, the PT-27 is built to cycle quickly and keep pace on the job. Simpson specifically positions it as a fast-cycling, reliable tool engineered for continuous use and low maintenance, which is exactly what crews want from a powder-actuated tool that is going to see regular site use.

Load compatibility is straightforward and jobsite-relevant. The PT-27 uses 0.27 caliber strip loads in brown through red power levels, covering levels 2 through 5. That gives the user a defined load range for dialing fastening performance to the base material and application. For direct fastening work, that matters because it helps match the tool to the job rather than forcing a one-load-fits-all compromise.

From a handling standpoint, the tool stays manageable at 13 1/2 inches long and 5 lb 4 oz. That is light enough to stay workable through repeated use while still being a full-size jobsite fastening tool. The form factor shown in the product images also makes sense for close-in fastening along walls and overhead or near-wall placement where control is important.

Application coverage is broad enough to make this a useful tool for general contractors, drywall crews, electrical installers, and remodelers doing direct fastening work. Simpson lists uses including acoustical ceilings, electrical applications, sill plates, drywall track and cold-formed steel installation, and waterproofing material or lathing. In plain terms, this is the kind of powder-actuated tool you buy when you need one platform that can cover a lot of everyday fastening duties instead of a highly specialized single-purpose tool.

There is also a path for extended reach. Simpson offers an extension pole tool for the PT-27 in 6 foot and 8 foot lengths, which adds versatility for overhead or harder-to-reach fastening points. If your work includes ceiling attachment or repeated elevated fastening, that compatibility makes the PT-27 a more adaptable system instead of just a standalone tool.

Fasten Wood to Masonry with Less Downtime

For direct fastening into concrete, speed only matters if the tool stays controllable and repeatable. The PT-27 is built to give you that balance for common attachment work where wood needs to be secured to a concrete base.

• Uses 0.27 caliber strip loads in brown through red power levels 2 through 5
• Supports fastener lengths from 1/2 inch to 2 1/2 inches, plus 3 inch washered fasteners

Works for General-Purpose Anchoring Jobs

This is the kind of fastening tool that earns its keep by covering more than one task. It is set up for general fastening applications where crews need one powder-actuated tool that can move between different materials and attachment styles.

• Compatible with .300 inch or 8 mm-headed fasteners
• Also accepts 1/4 inch-20 threaded studs for added application flexibility

Compact Enough for Repetitive Work

Repetitive fastening gets old fast when the tool is bulky or awkward. The PT-27 keeps the package manageable, which helps when you are working through long runs of track, clips, or sill attachment points.

• Overall length is 13 1/2 inches
• Tool weight is 5 lb 4 oz

What’s in the Box

• (1) Semi-automatic powder-actuated fastening tool

Key Specifications

Firing Action	Semi-automatic
Fastener Length	1/2 in – 2 1/2 in (3 in washered)
Fastener Type	.300 in or 8 mm-headed fasteners, or 1/4 in-20 threaded studs
Load Caliber	0.27 strip loads, brown through red (levels 2-5)
Length	13 1/2 in
Weight	5 lb 4 oz

Compatibility

Fastener Compatibility

Works with .300 inch or 8 mm-headed fasteners and 1/4 inch-20 threaded studs.

Load Compatibility

Uses 0.27 caliber strip loads in brown through red power levels 2 through 5.

Extension Pole Options

An extension pole tool is available for the PT-27 in 6 foot and 8 foot lengths.

Built For

General Contracting Construction Drywall Track Installation Electrical Applications Sill Plates Acoustical Ceilings Cold-Formed Steel Installation Residential Construction

At a Glance

0.27 Caliber

Strip Loads

1/2 in – 2 1/2 in

Fastener Length Range

13 1/2 in

Overall Length

5 lb 4 oz

Tool Weight

Tool Nut’s Take

Tool Nut’s Take

Simpson Strong-Tie PT-27 Powder-Actuated Fastening Tool Gets the Everyday Jobs Done

If you need one powder-actuated tool for common fastening work instead of a niche specialty model, this is the kind of practical, proven option that makes sense.

• Who it’s for: Contractors and installers handling sill plates, track, ceilings, electrical attachments, and general direct fastening in residential or light commercial work.
• Why it stands out: The mix of semi-automatic operation, broad fastener compatibility, and support for 0.27 caliber strip loads makes it flexible enough for a lot of day-to-day fastening tasks.
• Worth knowing: This is sold as the tool itself, so make sure your fasteners and correct load levels are matched to the job before you head to the site.

Common Questions

• What type of tool is the PT-27? It is a semi-automatic powder-actuated fastening tool for general-purpose direct fastening applications.
• What fasteners does it accept? It works with .300 inch or 8 mm-headed fasteners and 1/4 inch-20 threaded studs.
• What fastener lengths can it handle? The PT-27 supports fasteners from 1/2 inch to 2 1/2 inches, plus 3 inch washered fasteners.
• What loads does it use? It uses 0.27 caliber strip loads in brown through red power levels 2 through 5.
• Is there an extension option available? Yes. Simpson lists extension pole tool options for the PT-27 in 6 foot and 8 foot lengths.