Description

Key Features

Made for Connectors

The Simpson Strong-Tie N10DHDGPT2500 Strong-Drive 33 Degree SCN Smooth-Shank Connector Nail is built for structural connector installation, not general framing. That means the size, head style, and shank are matched to connector work where approved fasteners matter.

Exterior-Ready Coating

Hot-dip galvanized coating helps resist corrosion in exterior and treated-wood applications. If the job calls for a coated connector nail, this version is the right one to reach for.

Faster Nail Loading

Orange-painted tips help with quick orientation in the nailer, and the head ID stamp helps confirm size on the job. Small details, but they save time when you are loading nails all day.

Overview

The Simpson Strong-Tie N10DHDGPT2500 Strong-Drive 33 Degree SCN Smooth-Shank Connector Nail is a collated connector nail made for installing structural metal connectors in wood construction. This is a collated connector nail designed for structural connector installation in factory-built, modular, and wood-connector fastening applications. Model Number: N10DHDGPT2500. This pack gives you 2,500 hot-dip galvanized nails sized at 10d, 2-1/2 in. long, with a 0.148 in. shank diameter.

What matters here is that this is not just a generic strip nail. Simpson designed this Strong-Drive connector nail for approved connector applications, where the nail dimensions, head style, and coating all need to line up with the hardware and the environment. The smooth shank design helps with fast, easy penetration, which is exactly what you want when you are doing high-volume connector installation and need clean, repeatable driving with a power metal connector nailer.

This version uses a full round head with a smooth head pattern and a hot-dip galvanized finish. In practical terms, the full round head gives the bearing surface expected for connector fastening, while the hot-dip galvanized coating makes this a better fit for exterior applications and preservative-treated wood than bright, uncoated alternatives. Simpson also notes that bright nails are not for exterior or treated-wood use, which is why the coating on this model is more than a box-checking spec. It directly affects where you can use the nail.

The 33-degree collation format is another jobsite-relevant detail. These nails are intended for use with compatible 33-degree paper strip power metal connector nailers, so they are built around fast loading and efficient placement in tight connector locations. If you are installing hangers, ties, and other wood connectors with a pneumatic connector nailer, the angle and collation style matter because they affect fit, feed, and access. This nail is built around that workflow.

Simpson added a couple of smart usability touches that are easy to overlook until you have burned through a few strips on site. The orange-painted tips make it easier to orient the strip quickly during loading, which cuts down on fumbling. The head ID stamp gives you a quick visual check for nail size on the job, which helps when multiple approved fastener types are around the gang box or trailer.

From a spec standpoint, this nail is 9 gauge with a 0.285 in. head diameter and 0.148 in. shank diameter. That combination is what ties the product back to its intended connector applications. The 2-1/2 in. length and 10d size make it suitable for specific Simpson-approved connector installations where that size is called out. As always with connector fastening, the right move is to match the nail to the connector requirement instead of substituting by guesswork.

For buyers, the ideal user is the framing crew, modular builder, or contractor doing repetitive structural connector installation with a compatible 33-degree connector nailer. It is also a good fit for shops and crews that want a large pack count to keep production moving. If you need approved connector nails for wood connectors, want hot-dip galvanized protection, and do enough volume to justify a 2,500-pack, this is the kind of fastener that makes sense.

Built for Real Connector Work

This fastener is made for structural connector installation, where fit and approval matter more than using whatever strip nails are on the truck. It is intended for wood connector applications and factory-built or modular construction work.

• Tested and approved for a variety of connector applications and environments
• Designed for use in wood connector installations with compatible power fastening tools

Coated for Exterior and Treated Wood Use

The hot-dip galvanized coating is the big differentiator on this model. If the connector schedule calls for a coated nail, this version helps you stay on spec without stepping down to an interior-use fastener.

• Hot-dip galvanized per ASTM A153
• Better suited than bright nails for exterior and preservative-treated wood applications

Faster Loading, Easier Size Checks

When you are loading strips repeatedly, little details matter. The painted tips make orientation easier, and the head ID stamp helps you confirm you grabbed the right size before you start driving.

• Orange-painted tips help speed up nail orientation
• Head ID stamp provides a quick size check on the jobsite

What’s in the Box

• (2500) Simpson Strong-Tie N10DHDGPT2500 33 Degree SCN Smooth-Shank Connector Nails

Key Specifications

Fastener Type	Collated Nail
Collation Angle	33°
Length	2-1/2 in.
Shank Diameter	0.148 in.
Gauge	9
Head Diameter	0.285 in.
Shank Type	Smooth Shank
Head Type	Full Round Head
Finish	Hot-Dip Galvanized
Material	Carbon Steel
Penny Size	10d
Packaging Quantity	2500
Weight	31.8 lbs
API Approval	Approved – Full

Compatibility

Nailer Type

Designed for compatible 33-degree paper strip power metal connector nailers.

Application Fit

Intended for wood connector installations and structural connector applications where this nail size and type are specified.

Tool Verification

Simpson Strong-Tie recommends confirming compatible tool models through its Fastener Finder or tool compatibility matrix.

Built For

Factory-Built Construction Modular Construction Structural Connectors Wood Connector Installation Framing Crews General Contracting

Pro Tip

If you keep multiple connector nail sizes on site, use the head ID stamp before loading the magazine. It is a quick way to avoid mixing sizes when the right nail is tied to the connector approval.

Tool Nut’s Take

Tool Nut’s Take

Simpson Strong-Tie N10DHDGPT2500 Strong-Drive 33 Degree SCN Smooth-Shank Connector Nail Gets the Important Stuff Right

This is the kind of connector nail you buy when you want the approved fastener, the right coating, and a big enough pack to keep the crew moving.

• Who it’s for: Framing and modular construction crews using compatible 33-degree connector nailers for repetitive wood connector installation.
• Why it stands out: It combines the right connector-focused format with hot-dip galvanized protection, full round heads, and practical touches like painted tips and head ID stamps.
• Worth knowing: This is not a substitute-for-anything nail. Match it to the connector requirements and verify your nailer compatibility before you stock up.

Common Questions

• What kind of nail is this? It is a 33-degree collated smooth-shank connector nail with a full round head for structural connector applications.
• Can this nail be used in exterior applications? Yes. This model has a hot-dip galvanized finish, and Simpson states hot-dip galvanized nails are for exterior applications, unlike bright nails.
• What size is this nail? The nail is 10d, 2-1/2 in. long, with a 0.148 in. shank diameter and a 0.285 in. head diameter.
• What tools does it work with? It is designed for compatible 33-degree paper strip power metal connector nailers. Simpson recommends verifying fit through its Fastener Finder or compatibility matrix.