Description

Key Features

No Predrill Needed

The Type-17 point starts fast and drives cleanly into wood, so you can move quicker on connector installs without stopping to predrill.

Built for Exterior Use

Double-Barrier Coating helps the Simpson Strong-Tie SDS25112 heavy-duty connector screw hold up better in outdoor and treated-lumber applications where corrosion matters.

Secure Hex Head

A 3/8 inch hex head with an integrated washer gives you solid drive engagement and strong clamping for connector and wood-to-wood fastening.

Overview

Simpson Strong-Tie SDS25112 Strong-Drive SDS Heavy-Duty Connector Screw is a 1/4 inch by 1-1/2 inch structural wood screw made for connector fastening, wood-to-wood fastening, and engineered wood applications. This is a heavy-duty connector screw designed for structural wood fastening where you want strength, faster installation, and less hassle than lag screws or bolts in many connector-driven applications. Model Number: SDS25112.

The big selling point here is speed without giving up holding power. Simpson Strong-Tie uses a Type-17 point on the SDS25112, which helps the screw start easily with no predrilling and reduces wood splitting. On the job, that means fewer steps, less bit swapping, and cleaner installs when you are running a pile of connector screws into framing members.

This screw is built around a 3/8 inch hex drive and a hex head with a 0.500 inch integrated washer. That matters because the head gives you positive engagement with the driver, which helps when you are leaning into repetitive installs and do not want cam-out or stripped recesses. The integrated washer also spreads the bearing surface better at the connector face, which helps create a tight, secure connection.

The thread design is just as important as the point. The SDS25112 uses serrated threads with 10 threads per inch and a 1 inch thread length. In practical use, that thread pattern helps the fastener bite and pull consistently into wood while still driving efficiently. For installers working on framing hardware, deck work, or structural wood connections, that translates to a screw that goes in cleaner and seats with less fighting.

For exterior work, the Double-Barrier Coating is a key reason to pick this version. Corrosion resistance matters any time the screw is exposed to weather or used around treated lumber in approved conditions. If you are fastening heavy-duty Simpson Strong-Tie connectors outdoors, using the coated SDS version makes sense because you are matching the fastener to the real conditions it will live in, not just the day it gets installed.

Jobsite practicality is another strong point. Simpson recommends installing SDS screws with a low-speed 1/2 inch drill and a 3/8 inch hex driver. That setup tells you exactly what kind of tool this fastener is meant to work with: not a delicate finish tool, but a proper drill that can deliver steady torque. The head is also stamped for identification after installation, which is one of those details you appreciate later when inspecting work or matching fasteners on larger projects.

As far as fit and use, the SDS25112 is meant for heavy-duty Simpson Strong-Tie connectors and for wood-to-wood and engineered wood fastening where a short structural screw is the right length. At 1-1/2 inches overall, this specific version is especially useful when you need structural holding strength in a shorter screw for connector applications instead of a longer timber screw.

If you are a deck builder, carpenter, remodeler, or serious DIYer doing structural outdoor work, this is the kind of fastener that saves time and keeps the install straightforward. The Simpson Strong-Tie SDS25112 Strong-Drive SDS Heavy-Duty Connector Screw is a smart choice when you want a structural wood screw that drives fast, works with Simpson connector systems, and is built for exterior conditions.

Fast Structural Installs Without Predrilling

This screw is made to keep structural fastening moving. The Type-17 point helps it start quickly in wood, so you can skip predrilling in approved applications and spend more time installing instead of setting up.

• Type-17 point for easier starts and reduced splitting
• Recommended installation with a low-speed 1/2 inch drill and 3/8 inch hex driver

Made for Connector and Framing Hardware

The SDS line is not just a general wood screw with a fancy label. It is built specifically for heavy-duty connector installs, where head style, bearing surface, and drive engagement all matter.

• Designed for heavy-duty Simpson Strong-Tie connectors
• 3/8 inch hex head with 0.500 inch integrated washer for strong seating at the connector face

Exterior Protection Where It Counts

Outdoor structural work is hard on fasteners. The Double-Barrier Coating gives this version added corrosion resistance, which is why it is a solid pick for exterior wood applications and connector installs exposed to weather.

• Double-Barrier Coating for corrosion resistance
• Good fit for deck work, outdoor framing, and treated-lumber projects in approved applications

Key Specifications

Length	1-1/2 in.
Nominal Diameter	1/4 in.
Drive Type	3/8 in. Hex
Head Type	Hex Head with 0.500 in. Integrated Washer
Thread Type	Serrated Threads
Threads Per Inch	10 TPI
Thread Length	1 in.
Point Type	Type-17 Point
Coating	Double-Barrier Coating
Packaging Quantity	1500

Compatibility

Driver Interface

Uses a 3/8 inch hex driver. Simpson lists BITHEXR38-R1 as the replacement driver bit.

Connector System

Designed for heavy-duty Simpson Strong-Tie connectors and also suited to wood-to-wood and engineered wood fastening applications.

Built For

Carpentry Construction Deck Building General Contracting Remodeling Exterior Wood Fastening Connector Installation Engineered Wood

Pro Tip

Run these with a low-speed 1/2 inch drill instead of a high-speed driver when you are doing repeated connector installs. You will get better control seating the hex head and integrated washer without overdriving the fastener.

Tool Nut’s Take

Tool Nut’s Take

Simpson Strong-Tie SDS25112 Strong-Drive SDS Heavy-Duty Connector Screw Gets the Structural Work Done Faster

If you are doing connector installs and want a structural screw that drives clean, seats solid, and makes exterior work less annoying, this is the one to grab.

• Who it’s for: Deck builders, framers, remodelers, and serious DIYers working with Simpson connectors or structural wood-to-wood fastening.
• Why it stands out: The Type-17 point, hex head with integrated washer, and corrosion-resistant Double-Barrier Coating make it faster and more jobsite-friendly than a lot of generic structural screws.
• Worth knowing: This is the bulk 1500-count SDS25112 pack, so it makes the most sense for high-volume work rather than a one-off repair.

Common Questions

• Does the SDS25112 require predrilling? No. Simpson states the Type-17 point enables easy driving with no predrilling in approved applications.
• What tool should be used to install it? Simpson recommends a low-speed 1/2 inch drill with a 3/8 inch hex driver.
• Is this screw intended for exterior use? Yes. This SDS25112 version uses Double-Barrier Coating for corrosion resistance and is used in exterior wood applications.
• What is this screw mainly used for? It is designed for heavy-duty Simpson Strong-Tie connector installations and can also be used for wood-to-wood and engineered wood applications.