Description

Key Features

300 Lumens, Wearable

This Milwaukee 2014R USB Rechargeable 300-Lumen Clip Light gives you task lighting right where you need it, whether it is clipped to a cap, shirt, or nearby surface. That means less juggling a flashlight and more working with both hands free.

Aim the Light

The 165 degree movable head and two independent light panels let you direct light into panels, equipment bays, and other cramped spots. You can light the work instead of lighting the back of the cabinet.

Jobsite Tough

With an IP54 dust and water resistance rating and a 6 ft drop rating, this clip light is built for service work and punch-list jobs where tools get knocked around and conditions are not clean.

Overview

The Milwaukee 2014R USB Rechargeable 300-Lumen Clip Light is a compact rechargeable task light built for hands-free jobsite lighting. This is a clip light designed for on-person and on-surface lighting in tight work areas. Model Number: 2014R. If you spend time inside electrical panels, mechanical rooms, cabinets, attic spaces, or equipment bays, this light solves a common problem fast: getting usable light exactly where your eyes and hands are working.

Output is straightforward and useful. You get four modes with up to 300 lumens of TRUEVIEW high-definition output. High delivers 300 lumens for up to 3 hours, while low delivers 100 lumens for up to 5 hours. There are also spot high and spot low settings at 300 and 100 lumens with the same 3 and 5 hour runtimes. In real use, that gives you a bright flood option for general visibility and a more focused option when you need to see into a junction box, control cabinet, or service compartment without wasting runtime.

The design is what makes this light more useful than a basic pen light or small handheld flashlight. Milwaukee built it with a versatile clip and magnetic base, so you can wear it on a cap or shirt, or mount it to a nearby metal surface. The clip has a 1/2 inch opening, which matters because it is large enough to grab common gear without feeling flimsy or fussy. When you are moving from one check point to the next, being able to relocate the light in seconds saves time.

Milwaukee also gave the head 165 degrees of mobility and added two independent light panels. That combination is the practical advantage here. Instead of blasting light in one fixed direction, you can aim it where the work actually is. For service techs and electricians, that means better visibility behind wiring bundles, around framing members, and inside cramped assemblies where a fixed beam usually leaves shadows.

For jobsite durability, this Milwaukee rechargeable light is rated IP54 for dust and water resistance and is 6 ft drop rated. That makes it a better fit for real field use than cheaper rechargeable lights meant for clean bench work. It is also light enough to wear comfortably, with an assembled weight of just 0.16 lbs, so it is easy to keep on you during inspections, troubleshooting, and short service calls.

Charging is simple because the light uses a built-in battery and recharges via USB-C. Milwaukee includes a 2 ft heavy-duty USB-C cable in the box. There is no separate battery platform to buy into, which is good news if you just need a reliable rechargeable work light without adding another charger or pack to the truck. It is a self-contained lighting tool meant for grab-and-go use.

Who is this for? Electricians, HVAC techs, maintenance crews, facility service teams, inspectors, and serious DIY users will get the most out of it. If your work happens in confined spaces and you need both hands free, this clip light makes a lot of sense. If you need area lighting for a whole room, step up to something larger. But for close-up inspection, troubleshooting, and service work, this is the kind of compact light that earns a permanent spot in your bag or vest.

Hands-Free Light Where You Work

This clip light is built for the kind of work where a handheld flashlight just gets in the way. Wear it on a cap or shirt and keep both hands free for wire pulls, inspections, and service work.

• Versatile clip with a 1/2 inch opening for fast attachment
• Magnetic base adds on-surface mounting on metal equipment and panels

Aim Light Into Tight Spaces

The 165 degree movable head and dual-panel design help you get light past obstructions instead of fighting shadows. That is the difference between spotting the problem fast and wasting time repositioning the light every minute.

• 165 degree light head mobility improves aiming in cabinets and bays
• Two independent light panels let you optimize direction and runtime

What’s in the Box

• (1) Milwaukee Rechargeable Clip Light (2014R)
• (1) 2 ft Heavy Duty USB-C Cable

Key Specifications

Light Output	Up to 300 lumens
Runtime	Up to 5 hours
Light Modes	4 modes
High Mode	300 lumens for 3 hours
Low Mode	100 lumens for 5 hours
Head Mobility	165 degrees
Ingress Rating	IP54
Weight	0.16 lbs
Drop Rating	6 ft
Made In	Viet Nam

Compatibility

Charging Interface

USB-C rechargeable design for convenient charging with the included heavy-duty USB-C cable.

Power Source

Powered by a built-in rechargeable battery, so there is no separate battery pack or charger platform required.

Built For

Electrical HVAC Maintenance Service Work Equipment Inspection Tight Spaces Hands-Free Lighting DIY / Hobbyist

Pro Tip

When you are working inside a panel or equipment bay, clip the light to your hat or a nearby metal edge first, then use the 165 degree head adjustment to fine-tune the beam. You will spend a lot less time moving the light around and a lot more time actually working.

Warranty & Support

2 Year Limited Warranty.

Tool Nut’s Take

Tool Nut’s Take

Milwaukee 2014R USB Rechargeable 300-Lumen Clip Light Gets the Little Stuff Right

This is the kind of compact task light that ends up getting used way more than you expected because it is easy to wear, easy to mount, and actually useful in cramped work.

• Who it’s for: Electricians, HVAC techs, maintenance crews, inspectors, and anyone doing close-up work in dark cabinets, panels, or mechanical spaces.
• Why it stands out: The clip and magnetic mounting give you real placement options, and the 165 degree head mobility makes the light much more usable than a fixed-beam pocket light.
• Worth knowing: This is a focused task light, not a room light. If you need broad area coverage, go bigger. If you need hands-free lighting right on the work, this one makes a strong case for itself.

Common Questions

• How bright is this clip light? It delivers up to 300 lumens of output with four lighting modes.
• How long does it run? Runtime is up to 5 hours, depending on the selected mode. High runs at 300 lumens for 3 hours, and low runs at 100 lumens for 5 hours.
• Can it handle jobsite conditions? Yes. It is rated IP54 for dust and water resistance and is 6 ft drop rated.
• How does it charge? It uses a built-in rechargeable battery and charges through USB-C.