Description

Key Features

Portable but Strong

The aluminum main beam keeps the stand at just 31 lbs, so it is easier to move on and off the jobsite. Steel legs and support extensions still give it the rigidity needed to handle heavy saw setups and long stock.

Supports Long Material

This Milwaukee 48-08-0551 Folding Miter Saw Stand extends from 43.5 in to 100 in, which matters when you are cutting long trim, framing stock, or decking without fighting sagging workpieces.

Fast Setup, Easy Storage

The compact folding design, quick adjustments, and included mounting brackets make setup and teardown straightforward. That saves time when the saw needs to move with the job instead of staying parked in one shop bay.

Overview

The Milwaukee 48-08-0551 Folding Miter Saw Stand is a portable support stand built for miter saws on the jobsite. This is a folding miter saw stand designed for supporting miter saws and long workpieces during cutting. Model Number 48-08-0551. It is a strong fit for trim carpenters, remodelers, deck builders, punch-list crews, and serious DIY users who need a stand that is easy to carry but still stable under real work.

The big advantage here is the balance between portability and capacity. Milwaukee uses an aluminum main beam to keep weight down to 31 lbs, so one person can move it without dreading the walk from truck to cut station. At the same time, the stand is rated to support up to 500 lbs off the main beam, which gives it the muscle for heavy saws and long boards that would overwhelm lighter homeowner-grade stands.

The extension range is another reason this stand earns its keep. With an adjustable length from 43.5 in to 100 in, it can be compact when you are tight on space and stretched out when you are dealing with long trim, base, casing, deck boards, or other material that needs support on both sides of the saw. That means fewer awkward one-handed cuts and less time rigging makeshift outfeed supports.

Milwaukee also kept the setup practical. The compact folding design helps the stand store cleanly in a trailer, van, or corner of the shop, and the quick-adjust support system speeds up setup and teardown when the work area changes. The included saw mounting brackets are a real plus because they work with all brands of miter saws, so you are not locked into one saw brand just because of the stand.

Jobsite conditions are rarely perfect, and Milwaukee addressed that with an adjustable foot for leveling on uneven surfaces. That is one of those features that sounds small until you are cutting on a rough slab, driveway, or partially finished room and the stand wants to rock. Being able to level the stand helps keep cuts more predictable and the work area more stable.

There is also useful system compatibility built in. The Milwaukee 48-08-0551 Folding Miter Saw Stand accepts the Milwaukee Miter Saw Stand Table Top Accessory, model 48-08-0552, which gives you extra nearby workspace for layout tools and secondary tasks like sanding, coping, or routing near the saw. Milwaukee also offers an optional carrying strap, model 48-08-0553, for easier transport when you are moving between rooms or loading out at the end of the day.

Who should buy it? If you run a miter saw regularly outside of a permanent shop setup, this stand makes sense. It is especially useful for carpentry, remodeling, trim installation, deck work, and general contracting where mobility matters and material support matters just as much. If you need a fixed shop station only, a heavier dedicated bench may be a better call. If you need a jobsite stand that folds, carries reasonably well, fits a wide range of saws, and still handles real work, this is exactly the kind of stand worth buying once instead of replacing twice.

Ready for a Real Saw Setup

This stand is built to be used, not babied. With the saw mounted and the supports extended, it creates a proper cutting station that is easier to trust than a pair of sawhorses and a prayer.

• Mounting brackets work with all brands of miter saws
• Supports up to 500 lbs off the main beam

Support Long Stock Without the Wobble

Long material gets awkward fast if the stand is too short. The extension range on this one helps keep stock supported so cuts stay cleaner and the setup feels more controlled.

• Extends from 43.5 in to 100 in
• Designed for large workpieces and quick adjustment on site

Fold It Up and Get Moving

When the workday is over, the stand folds into a compact package that is easier to store and easier to haul. That matters if your saw setup rides in a van, trailer, or crowded garage.

• Compact folding design for easier storage
• 31 lb stand weight helps with carry-in and load-out

What’s in the Box

• (1) Folding Miter Saw Stand
• (1) Set of Saw Mounting Brackets

Key Specifications

Length Range	43.5 in – 100 in
Height	32 in
Width	27 in
Weight	31 lbs
Load Capacity	500 lbs
Main Beam Material	Aluminum
Legs and Support Extensions	Steel
Stand Type	Folding miter saw stand

Compatibility

Miter Saw Fit

Saw mounting brackets work with all brands of miter saws.

Accessory Table Top

Accepts the Milwaukee Miter Saw Stand Table Top Accessory, model 48-08-0552.

Transport Accessory

Optional carrying strap available as Milwaukee model 48-08-0553 for easier transport.

Built For

Carpentry Trim Installation Remodeling Deck Building General Contracting Woodworking

Pro Tip

If you are setting up on a rough slab or driveway, dial in the adjustable foot before loading the saw and material. Taking ten extra seconds there keeps the stand from rocking and makes long trim cuts feel a lot more controlled.

Warranty & Support

1-Year Limited Factory Warranty.

Tool Nut’s Take

Tool Nut’s Take

Milwaukee 48-08-0551 Folding Miter Saw Stand Gets the Basics Right

The Milwaukee 48-08-0551 Folding Miter Saw Stand is the kind of stand that makes sense for guys who actually move their saw instead of leaving it in one spot all year.

• Who it’s for: Pros and serious DIY users who need a portable miter saw stand for trim work, remodeling, deck work, and general jobsite cutting.
• Why it stands out: You get a light 31 lb carry weight, a 500 lb capacity, long material support out to 100 in, and brackets that are not brand-picky.
• Worth knowing: This is a stand, not a full workstation system by itself. If you want extra surface area nearby, the compatible Milwaukee table top accessory is worth a look.

Common Questions

• Will this stand fit only Milwaukee saws? No. The mounting brackets are designed to work with all brands of miter saws.
• How much weight can the stand support? The stand supports up to 500 lbs off the main beam.
• How far does the stand extend? The overall length adjusts from 43.5 in to 100 in.
• Can it be leveled on uneven ground? Yes. It has an adjustable foot to help level the stand on uneven surfaces.