Description

Key Features

Actually Quiet

At 60 dBA, this compressor is built for jobs where noise matters. That makes it easier to work in finished spaces, occupied homes, and smaller shops without the usual compressor racket.

Trim Gun Ready

The 2.4 CFM output at 90 PSI is enough to run 1 roofing gun or 2 to 3 trim and finish guns. For punch-list work, interior trim, and light production, that means fewer compromises.

Protected and Portable

The full roll-cage frame protects the pump and motor during transport, while the hand-carry layout keeps the Rolair compressor easy to move around the jobsite. Upward-facing gauges also make setup quicker when the unit is on the floor.

Overview

The Rolair JC10PLUS Oil Free 2.5 Gallon 1 HP Ultra-Quiet 60dB Air Compressor is a hand-carry portable air compressor built for finish work, light roofing, service calls, and indoor jobs where noise and portability matter. This is a portable air compressor designed for supplying air to nailers and other light pneumatic tasks. Model Number: JC10PLUS.

The big reason people buy this compressor is simple: it keeps the noise down without giving up real jobsite usefulness. Rolair rates it at 60 dBA, which is far quieter than the average jobsite compressor. If you are working in a customer’s home, inside a finished space, or in a small shop, that matters. You can still hold a conversation, and you are a lot less likely to annoy everyone within earshot.

Output is where the JC10PLUS stays practical. It delivers 2.4 CFM at 90 PSI, and Rolair positions it to run 1 roofing gun or 2 to 3 trim and finish guns. That puts it right in the sweet spot for punch-out work, baseboard and casing installation, cabinet trim, small repair jobs, and service work where dragging in a larger compressor just does not make sense. The 125 PSI max pressure and 2.5 gallon tank give it enough reserve for typical fastening cycles without making the unit bulky.

The pump and motor setup is built around efficiency and durability. You get an oil-less, two-cylinder, single-stage design with stainless-steel reed valves, cast-aluminum cylinders, and ball bearings. Rolair also uses a low-RPM motor, listed at 1700 RPM on the manufacturer site and 1725 RPM in Tool Nut web data, to help keep noise down and improve overall efficiency. Low-speed operation is a big part of why this unit sounds different from the high-speed pancake compressors most people are used to.

Jobsite handling is another upgrade over the older JC10 platform. Rolair calls out the sturdier roll-cage, integrated cord wrap, and upward-facing gauges as key improvements. The roll-cage does more than protect the compressor in the truck or on a crowded site. It also gives you a solid carry structure and helps shield exposed components. The upward-facing gauges are one of those small details that save time because you can check pressure and regulator settings without crouching around the side of the tank.

This compressor is also easier to live with in cold weather and on standard power. The oil-less motor has a low amp draw, listed around 7.5 to 8 amps depending on source, which helps with easier starting and makes it more manageable on common 115 to 120 volt circuits. For remodelers, trim carpenters, installers, and maintenance crews moving from room to room, that is a real advantage.

The Rolair JC10PLUS portable air compressor is best suited to pros and serious DIY users who need a quiet compressor for fastening applications, not a high-air-demand production machine. If your work revolves around finish nailers, brad nailers, light roofing use, service work, or indoor punch-list tasks, it fits well. If you need to continuously feed high-demand air tools, step up to a larger tank and higher CFM machine. For quiet fastening work and easy transport, this one is dialed in.

Quiet Air for Indoor Work

This is the kind of compressor you bring in when you want enough air for fastening work without turning the whole room into a noise complaint. The low-noise design, compact tank, and protected frame make it a strong fit for remodeling, trim installs, and service work.

• 60 dBA sound level for quieter operation in homes, shops, and occupied spaces
• Upward-facing gauges, regulator, and coupler are easier to see and reach when the unit is on the floor

What’s in the Box

• Rolair JC10PLUS air compressor
• Intake air filter
• Ball valve drain
• Air line regulator
• Coupler

Key Specifications

Voltage	115 to 120 V
Horsepower	1 HP
Air Delivery	2.4 CFM @ 90 PSI
Tank Capacity	2.5 gal
Maximum Pressure	125 PSI
Noise Level	60 dBA
Lubrication Type	Oil-Less
Weight	50 lbs

Built For

Trim Carpentry Finish Work Remodeling Service Calls Light Roofing Indoor Jobs Punch List Work General Contracting

Pro Tip

If you are buying the JC10PLUS for trim work, pair it with your finish and brad nailers, not high-demand air tools. That is where the quiet operation and 2.4 CFM at 90 PSI really pay off, especially inside finished homes.

Warranty & Support

1 year limited warranty.

Tool Nut’s Take

Tool Nut’s Take

Rolair JC10PLUS Oil Free 2.5 Gallon 1 HP Ultra-Quiet 60dB Air Compressor for Quiet, Real-World Fastening Work

This is one of those compressors that makes a lot of sense the second you use it indoors and realize you do not have to shout over it.

• Who it’s for: Trim carpenters, remodelers, installers, and service pros who need a portable air compressor for nailers in occupied or finished spaces.
• Why it stands out: The 60 dBA noise level, two-cylinder oil-less pump, low amp draw, and upgraded roll-cage layout make it more usable day to day than a loud bargain compressor.
• Worth knowing: This is a quiet fastening compressor, not a high-CFM shop unit. It is great for finish and light roofing applications, but not the tool to choose for continuous heavy air demand.

Common Questions

• Is this an oil-free compressor? Yes. The JC10PLUS uses an oil-less pump design.
• How loud is the compressor? It is rated at 60 dBA, which is notably quieter than many standard jobsite compressors.
• What tools is it suited for? Based on the provided product data, it can run 1 roofing gun or 2 to 3 trim and finish guns.
• Can it be used indoors? Yes. The product data specifically positions it for portability indoors and out.