Description

Key Features

More Accurate Crosscuts

The Woodpeckers SSMG StealthStop Miter Gauge w/ Fence and Stop gives you a longer reference surface and repeatable stop-based cutting, so you spend less time chasing pencil lines and more time making parts that actually match.

Fits Real-World Saw Slots

The patented leaf-spring miter bar takes up play in worn or inconsistent miter slots, which means smoother travel and less slop without constant readjustment.

Stop, Adjust, Repeat

The included StealthStop flips into position fast, folds away when you do not need it, and has a built-in micro-adjuster for dialing in repeat cuts without fuss.

Overview

The Woodpeckers SSMG StealthStop Miter Gauge w/ Fence and Stop is a table saw miter gauge accessory built for more accurate crosscutting and mitering. This is a table saw miter gauge designed for repeatable crosscuts, angle cuts, and better workpiece support. Model Number SSMG. If you are working with the basic gauge that came with your saw and fighting short fences, sloppy slot fit, or inconsistent repeat cuts, this upgrade addresses all three problems in one setup.

The biggest gain here is not just accuracy on paper. It is repeatability at the saw. The extendable fence gives you 20-1/2 inches of continuous support and extends to 29 inches, which matters when you are trimming multiple parts to the same length or trying to keep wider stock stable through the cut. Instead of measuring and marking every piece, you can set the stop once and make matching cuts with far less variation.

Woodpeckers also built the angle side of this tool the way experienced woodworkers want it. You get laser-accurate positive stops at 0, 15, 22-1/2, 30, 36, 45, and 60 degrees in both directions, along with a laser-engraved protractor for in-between settings. That gives you fast setup for common miters, but still leaves room for custom angles when the job calls for it. On real projects, that means less fiddling, fewer test cuts, and more confidence when parts need to line up cleanly.

The miter bar is a standout feature on this model. Instead of relying on a typical adjustment method that can wear or need repeated tuning, the patented leaf-spring miter bar expands and contracts to maintain a snug fit through variations in the slot. Woodpeckers says it accommodates miter slots from .742 inch to .765 inch wide. In plain terms, that means smoother travel with less rattle and less side play, even if your saw’s slot is not perfect. If your saw uses a T-track style slot, the bar includes two track retainers for added support on wider crosscuts, and those retainers can be removed if your saw does not use a T-track.

The StealthStop itself is designed for practical use, not just a spec sheet. It swings out sideways, which is especially helpful on mitered cuts where top-mounted stops can get in the way. When you need it, it is there immediately. When you do not, it folds out of the way completely. The built-in micro-adjuster is the part serious users will appreciate most because it lets you sneak up on exact length instead of loosening hardware and hoping you landed where you wanted.

From a build standpoint, this is not a throwaway accessory. The product is described as precisely machined and carefully inspected in Woodpeckers’ Strongsville, Ohio facility. That lines up with what buyers expect from this brand: tight machining, readable markings, and parts that are made to stay consistent over time. At 6.0 lbs, it has enough mass to feel substantial without being awkward to handle on and off the saw.

Compatibility is broad for standard table saw setups. If your miter slot is anywhere close to 3/8 inch x 3/4 inch, this miter gauge is intended to fit, and the leaf-spring design helps bridge the gap between nominal dimensions and real-world slots that are not dead consistent. That makes it a strong choice for woodworkers upgrading contractor saws, cabinet saws, and many hybrid saws where the stock gauge is the weak link in the crosscut setup.

This is a smart buy for woodworkers who care about fit and finish, cabinet and furniture builders making repeat parts, and serious hobbyists who want cleaner miters and more reliable crosscut accuracy from their table saw. If you mostly break down rough material and do not care about precise repeat cuts, it may be more gauge than you need. But if your projects involve trim, boxes, face frames, shelving parts, or any work where matching lengths matter, this upgrade makes a real difference.

What’s in the Box

• (1) Woodpeckers StealthStop Miter Gauge
• (1) Extendable fence
• (1) StealthStop flip stop with micro-adjuster

Key Specifications

Product Type	Table Saw Accessory
Weight (lbs)	6.0 lbs
Fence Support Length	20-1/2 in
Maximum Fence Length	29 in
Positive Stops	0°, 15°, 22-1/2°, 30°, 36°, 45°, 60° both directions
Miter Slot Width Range	.742 in to .765 in
Nominal Slot Fit	3/8 in x 3/4 in miter slots
Made In	USA

Compatibility

Miter Slot Fit

Designed to fit table saw miter slots that are anywhere close to 3/8 in x 3/4 in.

Leaf-Spring Range

The leaf-spring miter bar accommodates slot widths from .742 in to .765 in for a snugger, smoother fit.

T-Track Slots

Includes two track retainers for saws with T-track miter slots, and the retainers can be removed for saws without T-track.

Built For

Woodworking Cabinet Making Furniture Building Trim and Finish Work Repeat Crosscuts Miter Cuts Table Saw Upgrades Serious DIY / Hobbyist

Pro Tip

If you are cutting parts where the blade exits right at the fence, add a sacrificial end block to the fence. It supports the work closer to the cut and gives you a cleaner setup for repeat trimming and miter work.

Tool Nut’s Take

Tool Nut’s Take

Woodpeckers SSMG StealthStop Miter Gauge w/ Fence and Stop is the kind of upgrade you feel on the first cut

This is a well-thought-out table saw miter gauge for woodworkers who are tired of making good parts with a bad factory gauge.

• Who it’s for: Woodworkers, cabinet guys, furniture builders, and serious hobbyists who need cleaner crosscuts, dependable miters, and repeatable part lengths.
• Why it stands out: The leaf-spring bar solves the sloppy-slot problem, the fence gives real support, and the micro-adjustable StealthStop makes repeat cutting fast instead of fussy.
• Worth knowing: This is an accuracy upgrade, not a budget filler. If your stock miter gauge is the weak point in your table saw setup, this is money well spent.

Common Questions

• What kind of saw does this fit? It is intended for table saw miter slots that are anywhere close to 3/8 in x 3/4 in, and the leaf-spring bar accommodates slot widths from .742 in to .765 in.
• Can it handle common miter angles quickly? Yes. It has positive stops at 0°, 15°, 22-1/2°, 30°, 36°, 45°, and 60° in both directions.
• Is the fence long enough for repeat work? Yes. The fence provides 20-1/2 in of continuous support and extends to 29 in for longer setups.
• Will it work with a T-track style miter slot? Yes. The miter bar includes two track retainers for T-track slots, and they can be removed if your saw does not use that style.