Description

Key Features

Compact Core Tools

The hammer drill and impact driver are built short for tight work. That matters when you’re drilling overhead, fastening inside cabinets, or working between studs where a full-size tool just gets in the way.

Brushless 4-Tool Kit

This Milwaukee 3693-24CX M18 4-Tool Combo Kit gives you four brushless cordless power tools for drilling, driving, wood cutting, and demolition cuts. One kit covers the jobs most users hit every week.

Ready to Start

With an XC 4.0 battery, a CP 2.0 battery, charger, and contractor bag included, you are not piecing together a system from scratch. Charge up and get straight to work.

Overview

The Milwaukee 3693-24CX M18 4-Tool Combo Kit is a cordless combo kit built around four core jobsite tools: a 1/2 inch hammer drill/driver, a 1/4 inch hex 3-speed impact driver, a 7-1/4 inch circular saw, and a HACKZALL reciprocating saw. This is a 4-tool cordless combo kit designed for drilling, fastening, wood cutting, and general jobsite tear-out. Model Number: 3693-24CX. If you are buying into the M18 platform or replacing older brushed tools, this kit gives you the basics in one box without making you chase down batteries and a charger separately.

The biggest selling point here is balance. Milwaukee kept the hammer drill at 5.8 inches long and the impact driver at 4.4 inches long, so the two tools you reach for most are easier to handle in tight spots. The hammer drill runs at 0-550 and 0-1,700 RPM for drilling and driving, while the impact driver reaches 0-3,600 RPM and delivers 1,700 in-lbs of peak torque. In plain terms, that means the drill covers general-purpose drilling and anchor work, while the impact driver handles screws and lag fasteners faster with less wrist fight.

The saw side of the kit is what makes this more than a basic starter set. The brushless 7-1/4 inch circular saw gives you a full-size blade and a listed 2-1/2 inch cut depth, which is what most users want for framing lumber, sheet goods, and common jobsite cuts. The HACKZALL adds one-handed reciprocating saw capability with 0-3,000 strokes per minute and a 3/4 inch stroke length, so you can move from rough carpentry to cutting pipe, metal, or PVC without changing platforms.

Milwaukee built this kit around brushless motors and REDLINK intelligence. That matters because the system is designed to manage how the M18 REDLITHIUM batteries and tools work together under load. On the job, that translates to better efficiency, steadier performance, and less of that feeling where a tool starts to fall off hard once the work gets tougher. Milwaukee also calls out improved runtime on the circular saw compared to brushed models, which is exactly where brushless efficiency pays off.

From a practical standpoint, this kit is easy to live with. You get two batteries, including an XC 4.0 pack for longer runtime and a CP 2.0 pack for lighter weight on the drill and impact driver. The included M18 and M12 multi-voltage charger is useful if you already own compact Milwaukee tools on the M12 line, and the contractor bag keeps the whole setup together for transport between jobs, trucks, and punch-list work.

System compatibility is another reason this kit matters. It runs on the Milwaukee M18 battery platform and is listed as compatible with 250+ M18 solutions. That gives the kit room to grow. You can start with these four tools, then add bare tools later without changing batteries, chargers, or workflow. For a contractor, that means lower platform friction. For a serious DIY user, that means fewer dead-end purchases.

Who should buy it? This combo kit makes the most sense for remodelers, general contractors, electricians, maintenance crews, punch-list techs, and homeowners who want real cordless power tools instead of light-duty homeowner kits. If you need a broad-use impact driver, hammer drill, circular saw, and reciprocating saw in one M18 setup, this is the kind of kit that handles everyday work without wasting money on filler tools you will not use.

One Kit That Covers the Everyday Work

This kit works because the tool mix makes sense. You are getting the four cordless power tools most users actually reach for on a remodel, service call, or home project, plus the batteries and charger to put them to work.

• Includes a hammer drill, impact driver, 7-1/4 inch circular saw, and HACKZALL reciprocating saw
• Comes with both an XC 4.0 battery for runtime and a CP 2.0 battery for lighter-weight handling
• Contractor bag helps keep the full Milwaukee combo kit together between jobs

What’s in the Box

• (1) M18 Compact Brushless 1/2 in Hammer Drill/Driver, 3602-20
• (1) M18 Compact Brushless 1/4 in Hex 3-Speed Impact Driver, 3651-20
• (1) M18 Brushless 7-1/4 in Circular Saw, 2631-20
• (1) M18 HACKZALL Recip Saw, 2625-20
• (1) M18 REDLITHIUM XC 4.0 Battery Pack, 48-11-1840
• (1) M18 REDLITHIUM CP 2.0 Battery Pack, 48-11-1820
• (1) M18 and M12 Multi-Voltage Charger, 48-59-1812
• (1) Contractor Bag

At a Glance

4

Tools Included

1,700 in-lbs

Impact Driver Torque

2-1/2 in

Circular Saw Cut Depth

3,000 SPM

HACKZALL Stroke Speed

Key Specifications

Battery Platform	M18
Motor Type	Brushless
Voltage (V)	18 V
Number of Tools	4
Number of Batteries Included	2
Impact Driver No-Load Speed (RPM)	0-3,600 RPM
Impact Driver Torque	1,700 in-lbs
Made In	Mexico

Compatibility

Battery Platform

Works on the Milwaukee M18 battery system.

Charger Compatibility

Includes an M18 and M12 multi-voltage charger, useful for users running both Milwaukee cordless platforms.

Accessory Interface

The impact driver uses a 1/4 inch hex interface for common driver bits and fastening accessories.

Reciprocating Saw Blades

The HACKZALL features a Quik-Lok blade clamp for fast blade changes with Sawzall blades and HACKZALL blades.

Platform Growth

Part of the Milwaukee M18 system, listed as compatible with over 250+ M18 solutions.

Built For

General ContractingRemodelingCarpentryElectricalPlumbingMaintenanceDIY / HobbyistDrilling, Fastening, and Cutting

Pro Tip

Run the XC 4.0 battery on the circular saw or HACKZALL when you need runtime, then keep the CP 2.0 on the drill or impact driver when you want the lightest setup in tight spaces. That gives each tool the battery style that makes the most sense instead of treating both packs the same.

Warranty & Support

5 Year Tool, 3 Year XC Battery, 2 Year CP Battery.

Tool Nut’s Take

Tool Nut’s Take

Milwaukee 3693-24CX M18 4-Tool Combo Kit Is the Right Kind of Starter Kit

This is a smart buy for somebody who wants the core M18 tools they will actually use, not a padded kit full of extras that sit in the bag.

• Who it’s for: Contractors, remodelers, service techs, and serious DIY users who need one cordless combo kit for drilling, impact driving, circular saw work, and reciprocating cuts.
• Why it stands out: The compact drill and impact driver are the real draw here, but the full-size 7-1/4 inch circular saw and included HACKZALL make the kit far more useful than entry-level two-tool sets.
• Worth knowing: You get one XC 4.0 and one CP 2.0 battery, so the kit is ready to work, but heavy all-day saw use may still have you wanting another M18 pack down the road.

Common Questions

• Is this a brushed or brushless combo kit? It is a brushless combo kit. The listed motor type is brushless.
• What battery system does this kit use? This kit uses Milwaukee M18 batteries and is part of the M18 platform.
• Can the included charger charge M12 batteries too? Yes. The included charger is an M18 and M12 multi-voltage charger.
• What kind of jobs is this combo kit set up for? It is built for drilling, fastening, circular saw cutting, and reciprocating saw work across wood, metal, and PVC applications.