Description

Key Features

Fast Blade Changes

The QuickIN system lets you swap accessories in under 3 seconds without reaching for a wrench. That saves time when you move from plunge cuts in wood to trimming metal or plastic on the same job.

Controlled Cutting Power

The 450 watt motor, constant-speed control, and 10,000 to 17,000 oscillations per minute give this oscillating multi-tool the range to cut fast while staying manageable in finish work and renovation tasks.

Built for Long Days

FEIN’s anti-vibration setup, noise dampening, all-metal drive head, and long industrial cord make it a better fit for real work than light-duty multi-tools that wear you out or bog down under load.

Overview

The Fein Multimaster 700 Oscillating MultiTool with L-Boxx & E-Cut Saw Blade is a corded professional oscillating multi-tool built for interior construction, renovation, and detail cutting. This is an oscillating multi-tool designed for plunge cutting, trimming, scraping, and flush cutting in wood, metal, and plastic. Model number 72296863090. If you want a tool that can stay on the job all day without waiting on batteries, this one is built around steady power, fast accessory changes, and durability where it counts.

At the center of this kit is FEIN’s 450 watt motor paired with variable electronic speed control and a tacho generator that helps maintain speed under load. In plain terms, that means the tool does not nose over as quickly when you lean into a cut. The speed range of 10,000 to 17,000 oscillations per minute gives you useful control for cleaner cuts in trim, controlled plunge work in framing lumber, and better handling when cutting metal or plastic where too much speed can create excess heat.

The StarlockMax accessory mount is a big part of why this model stands out. It is not just about holding the blade. It is about transferring power efficiently and opening up compatibility with FEIN Starlock, StarlockPlus, and StarlockMax accessories. That gives the Fein Multimaster 700 Oscillating MultiTool with L-Boxx & E-Cut Saw Blade a wider working range than a basic oscillating tool. If your work shifts between cutting door jambs, undercutting trim, removing grout, scraping adhesive, or making controlled cuts in mixed materials, the mount system matters because it expands what the tool can do without changing platforms.

FEIN also paid attention to the stuff that affects you after the first five minutes of use. The anti-vibration system and noise dampening are there to make extended use more comfortable. On renovation work, that matters. Oscillating tools are incredibly useful, but the cheaper ones can be tiring and harsh in the hand. This model is designed to stay more controlled and more predictable during repetitive cuts. The metal drive head adds durability at a wear point that sees real stress, especially when the tool gets used hard in remodeling and punch-list work.

Jobsite practicality is strong here too. The cord is 16 to 16.4 feet long depending on the source listing, which gives you more reach before you need an extension cord dragged right next to the work area. The tool-free QuickIN system lets you change accessories in under 3 seconds, which is exactly the kind of feature that sounds small until you use it on site. When you are bouncing between cuts and materials, less downtime means better workflow. FEIN also includes an L-Boxx case, so the tool stores and transports cleanly instead of riding loose in the truck.

This kit includes a bimetal E-Cut saw blade, which makes sense for the kind of mixed-material work oscillating tools are known for. The included blade is useful for wood, metal, and plastic, so you can get to work immediately on common renovation tasks. The tool is corded, so it is best suited for users who care more about uninterrupted runtime and consistent output than absolute mobility. It is also worth noting that this is not a dust-extraction-focused model and does not include a built-in light, so it is more about cutting performance and durability than extra convenience features.

Who should buy it? Contractors, remodelers, finish carpenters, property maintenance crews, and serious DIY users who reach for an oscillating tool regularly. If you only use a multi-tool a few times a year, a lighter-duty option may be enough. If you rely on one for daily trim work, cutouts, flush cuts, and repair work, this FEIN earns its keep with smoother operation, stronger accessory support, and a build that is clearly aimed at professional use.

At a Glance

450W

Motor Output

10,000-17,000

Oscillations Per Minute

16.4 ft

Cord Length

3.5 lbs

Tool Weight

Clean Plunge Cuts in Tight Renovation Work

An oscillating multi-tool earns its place when there is no room for a bigger saw. This FEIN is built for those exact cuts, like plunge cuts in framing, trim modifications, and flush work where control matters more than raw size.

• StarlockMax mount is designed for strong power transfer and broad accessory support
• Oscillating range is listed as 2 x 2.0 degrees for faster cutting performance
• Variable speed helps match blade speed to wood, metal, or plastic

Ready for Transport and Daily Use

This kit is set up for someone who actually moves tools from one room, floor, or job to the next. The included L-Boxx case keeps the tool protected, organized, and easier to stack with other gear.

• Includes the tool, one E-Cut blade, and L-Boxx carrying case
• 16 foot industrial-quality rubber-clad cord gives a wider working radius
• All-metal drive head is built for heavy use and longer service life

What’s in the Box

• (1) FEIN MULTIMASTER MM 700 Max oscillating multi-tool
• (1) E-Cut bimetal saw blade
• (1) L-Boxx carrying case

Key Specifications

Power Source	Corded
Tool Amps	3.3 A
Motor Output	450 W
Oscillations Per Minute	10,000 to 17,000 OPM
Speed Type	Variable Speed
Oscillation Angle	2 x 2.0°
Cord Length	16.4 ft
Net Tool Weight	3.5 lbs
Tool-Free Accessory Change	Yes
Vibration Dampening	Yes
Case Included	Yes, L-Boxx hard case
Made In	Germany

Compatibility

Accessory Mount

StarlockMax tool mount.

Accessory Classes

Works with FEIN Starlock, StarlockPlus, and StarlockMax accessories.

Mechanical Interface

Includes a mechanical interface for stationary use in table or drill jig holders, or to attach depth stops.

Built For

Interior ConstructionRenovationRemodelingFinish CarpentryFlush CuttingPlunge CuttingWood, Metal & PlasticGeneral Contracting

Warranty & Support

1 year limited warranty, extended to 2 years when registered.

Tool Nut’s Take

Tool Nut’s Take

Fein Multimaster 700 Oscillating MultiTool with L-Boxx & E-Cut Saw Blade is for users who are done fighting weak multi-tools

This is the kind of corded oscillating multi-tool that makes sense when the tool is not just a backup, but part of your regular workflow.

• Who it’s for: Remodelers, carpenters, installers, and serious DIY users doing repeated plunge cuts, trim cuts, and mixed-material repair work.
• Why it stands out: The combination of StarlockMax compatibility, a strong 450 watt motor, very fast accessory changes, and better vibration control puts it above entry-level options.
• Worth knowing: This is a corded kit, so you trade battery freedom for consistent runtime. If you work near power and want steady output all day, that is usually the right trade.

Common Questions

• Is this a corded or cordless oscillating tool? It is a corded oscillating multi-tool.
• What accessory systems does it fit? It uses a StarlockMax mount and is listed as compatible with Starlock, StarlockPlus, and StarlockMax accessories.
• Does it have variable speed? Yes. It has variable electronic speed control with a listed range of 10,000 to 17,000 oscillations per minute.
• Is the accessory change tool-free? Yes. FEIN’s QuickIN system allows tool-free accessory changes in under 3 seconds.