Description

Key Features

Quieter Fastening

The hydraulic powertrain cuts sound by up to 50% versus a standard impact driver, which matters when you are working in occupied buildings, service calls, or indoor remodels.

Compact Hydraulic Driver

At 4.33 inches long with 1,000 in-lbs of torque, this Milwaukee hydraulic driver kit reaches tight spots without giving up the driving power needed for demanding fastening work.

Built for Control

Three drive modes, single-handed bit insertion, and Tri-LED lighting make it easier to match speed to the fastener and see what you are doing in dim work areas.

Overview

The Milwaukee 2761-22 M18 FUEL SURGE 1/4″ Hex Hydraulic Driver Kit is a compact cordless fastening kit built for pros who want impact-driver capability with less noise and less harshness. This is a hydraulic driver kit designed for fastening in occupied spaces, tight work areas, and repetitive screw-driving applications. Model 2761-22 includes the driver, two M18 REDLITHIUM XC5.0 battery packs, an M18 and M12 multi-voltage charger, a carrying case, and a belt clip.

What separates this tool from a standard impact driver is Milwaukee’s FLUID-DRIVE hydraulic powertrain. Instead of the sharper, louder feel you get from a conventional impact mechanism, this setup is built to drive fastereners with smoother action while reducing metal-on-metal contact inside the tool. Milwaukee rates it at up to 50% quieter and with 3X less vibration than a standard impact driver. On the job, that means less fatigue during long runs of fastening and a better fit for apartments, offices, schools, hospitals, and punch-list work where noise matters.

The performance numbers are still there. The POWERSTATE brushless motor delivers up to 1,000 in-lbs of torque, up to 3,200 RPM, and up to 6,300 impacts per minute. That gives the Milwaukee 2761-22 M18 FUEL SURGE 1/4″ Hex Hydraulic Driver Kit the speed for common construction and remodeling fastening tasks while keeping the tool easier on your ears and hands. Milwaukee also states it delivers up to 3X faster application speed than the previous generation, so this is not a tradeoff tool that gives up productivity just to be quieter.

Size is another big reason this tool makes sense. At 4.33 inches long and 2.4 pounds bare, it is built to fit between framing members, inside cabinets, above ceilings, behind equipment, and anywhere a full-size impact driver starts to feel bulky. The compact head helps you stay square to the fastener in awkward positions, which usually means fewer cam-outs, less stripped hardware, and less time repositioning your hand.

Milwaukee also paid attention to real jobsite use. The 3-Mode DRIVE CONTROL gives you a way to back off speed and power when you are working with smaller fasteners or finish materials, then step up when you need more output. The hex quick-change chuck supports fast bit swaps, and the single-handed bit insertion makes those swaps quicker when your other hand is holding material or balancing on a ladder. Tri-LED lighting improves visibility around the bit tip, which is exactly where shadows usually get in the way on service calls and interior work.

On the electronics side, REDLINK PLUS Intelligence is there to help manage heat and overload conditions between the tool and battery. That matters most when you are doing repeated back-to-back fastening and want the tool to keep working without beating up the battery pack. Because this is part of the Milwaukee M18 battery system, it is compatible with all M18 batteries, so existing Milwaukee cordless users can drop it right into an established setup without adding another platform.

Who is this kit for? It makes a lot of sense for remodelers, electricians, HVAC techs, maintenance crews, punch-list contractors, and general tradespeople who spend a lot of time driving screws indoors or around finished spaces. It is also a smart pick for anyone who likes the compact speed of an impact-style fastening tool but is tired of the sharper noise and vibration of a standard impact driver. If you already run M18 and want a driver that is easier to use all day, this one earns its spot fast.

Compact Kit, Less Noise, Better Access

This kit gives you the full ready-to-work setup, not just the bare tool. For buyers who need a quieter cordless fastening solution right away, the included batteries, charger, case, and belt clip make it easy to put the driver straight into service.

• Includes two M18 REDLITHIUM XC5.0 battery packs for longer runs between charges
• Compact 4.33 inch tool length helps when fastening in cabinets, corners, and mechanical spaces

What’s in the Box

• (1) M18 FUEL SURGE 1/4″ Hex Hydraulic Driver (2761-20)
• (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Packs (48-11-1850)
• (1) M18 & M12 Multi-Voltage Charger (48-59-1812)
• (1) Carrying Case
• (1) Belt Clip

Key Specifications

Battery System	M18
Motor Type	POWERSTATE Brushless
Chuck Type	1/4 in Hex Quick Change
Maximum Torque	1,000 in-lbs
No-Load Speed	0 to 3,200 RPM
Impacts Per Minute	Up to 6,300 IPM
Length	4.33 in
Weight Excluding Battery	2.4 lb
Height	7.78 in
Width	2.46 in
Made In	Viet Nam

Compatibility

Battery Platform

Compatible with all Milwaukee M18 batteries.

Charger

Includes an M18 and M12 multi-voltage charger.

Bit Interface

Uses a 1/4 inch hex quick-change chuck for standard 1/4 inch hex insert bits.

Built For

Remodeling Electrical HVAC Maintenance General Contracting Indoor Fastening Occupied Spaces Tight-Space Access

Pro Tip

Use the lower DRIVE CONTROL modes when setting cabinet screws, device screws, or hardware into finished surfaces. This hydraulic driver is smooth enough that dialing it back helps you keep control without giving up the compact feel that makes it so useful indoors.

Warranty & Support

5 year tool warranty and 3 year battery warranty.

Tool Nut’s Take

Tool Nut’s Take

Milwaukee 2761-22 M18 FUEL SURGE 1/4″ Hex Hydraulic Driver Kit is the smart buy for quieter everyday fastening

If you want a compact cordless driver that is easier to live with all day than a standard impact, this is one of the best M18 options Milwaukee makes.

• Who it’s for: Pros and serious DIY users doing indoor fastening, service work, remodeling, punch-list work, and tight-space installs.
• Why it stands out: The hydraulic drive gives you less noise and vibration, but you still get real output with 1,000 in-lbs of torque, 3,200 RPM, and a very compact 4.33 inch length.
• Worth knowing: This is built around smoother, quieter fastening rather than the sharper hit of a standard impact driver, so it is a great fit when control, comfort, and noise reduction matter most.

Common Questions

• Is this tool compatible with all Milwaukee M18 batteries? Yes. Milwaukee states this hydraulic driver is compatible with all M18 batteries.
• Does this kit include batteries and a charger? Yes. The kit includes two M18 REDLITHIUM XC5.0 battery packs and one M18 and M12 multi-voltage charger.
• What is the maximum torque of this hydraulic driver? The maximum torque is 1,000 in-lbs.
• How compact is the tool? The tool measures 4.33 inches in length and weighs 2.4 pounds without a battery.