Description

Key Features

Kickback Control

The built-in KickbackStop helps reduce kickback during sawing and plunge cuts. That matters when you are working on finished panels, doors, or flooring and want better control with less chance of the saw jumping back at you.

Deep Cuts, Compact Saw

With up to 2-7/16 in. cutting depth, this Festool plunge cut track saw handles thicker material without stepping up to a bulkier saw. You get more capacity while keeping the control and portability track saw users want.

System Ready

The brushless EC-TEC motor, FastFix blade change, and compatibility with Festool guide rails and FSK cross-cutting rails make this saw more than a single-purpose cutter. It is built to move from sheet goods to bevel work to repeatable crosscuts without wasting setup time.

Overview

The Festool 576726 TS 60 KEB-F-Plus Plunge Cut Track Saw Set is a corded plunge-cut track saw built for precise straight cuts, bevel cuts, and clean finish work in sheet goods, doors, flooring, and solid material up to 2-7/16 in. thick. This is a plunge-cut track saw designed for accurate ripping, cross-cutting, bevel cutting, and cutting interior components to size. Model Number: 576726.

What makes this saw matter is the mix of track-saw precision and real jobsite capacity. Festool gives you a cutting depth of 0 to 2-7/16 in. with a 6-5/8 in. blade, so you can handle thicker stock while still working in the controlled, splinter-conscious way people buy a track saw for in the first place. At 45 degrees, it still cuts up to 1-3/4 in., which is useful when you are beveling trim stock, fitting doors, or working through flooring and panel material cleanly.

The big talking point here is KickbackStop. Festool built this saw to actively help reduce kickback during sawing and plunge cutting into the workpiece. That is not just a brochure feature. On a plunge cut into a countertop, door, or finished panel, better kickback control means more confidence, less chance of marring material, and less drama when the blade first enters the cut.

Power comes from a 1,500 watt brushless EC-TEC motor with a variable no-load speed range of 3,000 to 6,800 RPM. In practical terms, that gives this circular saw enough speed for clean cuts and enough flexibility to match the blade speed to the material. Paired with Festool’s thin kerf blade setup, it is designed to keep feed pressure lower while still moving through the cut efficiently. That is useful on long rips in veneered panels, hardwood flooring, and general finish carpentry where a clean edge saves cleanup later.

The saw is also built around repeatable accuracy. Bevel adjustment runs from -1 degree to 47 degrees, which gives you a little extra room on both ends for dialed-in fits. Festool also includes a transparent sliding sight window, so you can keep a better view of the blade and cut line during setup and entry. The FastFix spindle lock simplifies blade changes, which matters if you switch between fine-finish work and more general cutting during the same day.

On the jobsite side, this saw is made to work as part of a full Festool system, not as a standalone oddball. It is designed to pair with Festool guide rails and can also be combined with FSK cross-cutting guide rails to create a portable, easy-to-use cross-cutting setup for accurate angle cuts. That gives you one saw that can cover sheet breakdown, door trimming, worktop cutouts, flooring cuts, and repeat crosscuts without dragging a separate stationary saw into every space.

Dust management is built in with a dust extraction connection sized at 1-1/16 in. and 1-7/16 in. (27/36 mm), which fits the way Festool users typically run a saw: rail-guided, vacuum-connected, and working indoors or in finished spaces where dust control matters. The corded 120 VAC setup also keeps runtime out of the equation, which is a real advantage for long rip cuts and repetitive production work.

At 10.58 lbs, the TS 60 KEB-F-Plus stays manageable for a saw with this much depth capacity. It is a strong fit for cabinet installers, finish carpenters, remodelers, flooring installers, and serious woodworkers who want one premium track saw that can do more than basic panel cuts. If your work depends on accurate, clean cuts with fewer do-overs, this is the kind of saw that earns its spot fast.

Festool 576726 TS 60 KEB-F-Plus Plunge Cut Track Saw Set on the Rail

This saw is built for the kind of cutting where a straight line actually matters. On a guide rail, it gives you controlled entry, repeatable tracking, and clean results on sheet goods, flooring, and trim components.

• Up to 2-7/16 in. cutting depth for thicker stock and solid material
• Bevel range from -1 degree to 47 degrees for accurate angle work
• Compatible with Festool guide rails and FSK cross-cutting guide rails

Fast Blade Changes Keep Work Moving

When you swap from fine-finish work to a different material, the saw should not slow you down. Festool’s FastFix spindle lock and open access design make blade changes more straightforward, which is a real time-saver when the job changes midstream.

• FastFix spindle lock simplifies saw blade changes
• Includes HW 168 x 1.8 x 20 WD42 saw blade
• Transparent sight window improves blade visibility during setup

Brushless Power for Clean, Controlled Cutting

The motor setup here is about more than raw speed. The brushless EC-TEC motor and 3,000 to 6,800 RPM range are tuned for smooth feed, strong cut quality, and less effort pushing through the work.

• 1,500 watt motor for demanding cutting applications
• Variable no-load speed range of 3,000 – 6,800 RPM
• Thin kerf blade system helps the saw cut efficiently with less effort

What’s in the Box

• (1) Festool TS 60 KEB plunge cut track saw
• (1) HW 168 x 1.8 x 20 WD42 saw blade
• (1) Sight window
• (1) Splinterguard
• (1) 5 mm hex key
• (1) Systainer3 SYS3 M 337

Key Specifications

Tool Type	Plunge-Cut Track Saw
Power Consumption	1,500 W
Voltage	120 VAC
No-Load Speed	3,000 – 6,800 RPM
Blade Diameter	6-5/8 in. (168 mm)
Cutting Depth	0 – 2-7/16 in. (0 – 62 mm)
Max Cutting Depth at 45b0	1-3/4 in. (45 mm)
Bevel Range	-1b0 to 47b0
Dust Port Diameter	1-1/16 in. / 1-7/16 in. (27 / 36 mm)
Cable Length	13.12 ft (4 m)
Weight	10.58 lbs (4.7 kg)

Compatibility

Guide Rail System

Designed to work with Festool guide rails for straight, precise ripping and panel cutting.

FSK Cross-Cutting Rails

Can be combined with Festool FSK cross-cutting guide rails for portable, accurate crosscuts and angle cuts.

Dust Extraction

Dust extraction connection sizes are 27 mm and 36 mm, matching common Festool dust collection setups.

Built For

Finish CarpentryCabinet InstallationRemodelingFlooringDoor TrimmingSheet Goods CuttingKitchen Worktop CutoutsWoodworking

Pro Tip

If you are bouncing between long rips and repeat crosscuts, set this saw up with your standard guide rail first, then move to an FSK cross-cutting rail for angle work instead of trying to force one setup to do both. That is where the TS 60 K really saves time compared to hauling separate cutting tools around the job.

At a Glance

2-7/16 in.

Max Cutting Depth

3,000 – 6,800

RPM Range

1,500 W

Power

10.58 lbs

Weight

Tool Nut’s Take

Tool Nut’s Take

More Capacity Without Giving Up Track Saw Control

The Festool 576726 TS 60 KEB-F-Plus Plunge Cut Track Saw Set is the kind of saw you buy when clean cuts, repeatability, and versatility actually affect how fast you finish the job.

• Who it’s for: Pros and serious woodworkers cutting sheet goods, doors, flooring, and finish materials who want one premium track saw that can handle both detail work and thicker stock.
• Why it stands out: KickbackStop, 2-7/16 in. depth capacity, brushless EC-TEC power, and the ability to work with both standard Festool rails and FSK cross-cutting rails make it more flexible than a typical plunge saw.
• Worth knowing: This is a corded saw, and that is honestly part of the appeal here. If you are doing long cuts or production work, steady power beats worrying about battery swaps.

Common Questions

• What type of saw is this? It is a corded plunge-cut track saw designed for guided straight cuts, bevel cuts, and precision work in wood-based sheet goods, doors, flooring, and similar materials.
• What is the maximum cutting depth? Maximum cutting depth is 2-7/16 in. (62 mm), and maximum cutting depth at 45 degrees is 1-3/4 in. (45 mm).
• Can it be used with Festool rails? Yes. It is designed to work with Festool guide rails and can also be combined with Festool FSK cross-cutting guide rails.
• Does it have variable speed? Yes. No-load speed is adjustable from 3,000 to 6,800 RPM to better match the cut to the material.