Description

Key Features

One-handed control

The clamp is built to apply with one hand, so you can position edge banding or trim with the other hand and keep it from creeping while the glue sets.

Pivoting jaws

Pivoting jaws help the pads sit flat across different stock thicknesses, so you get consistent pressure instead of a clamp that rocks and leaves gaps.

Glue-resistant surfaces

The stretch band and clamp pads are glue-resistant, so cleanup is faster and the clamp stays usable after messy edge banding sessions.

Overview

The Kreg KEBC100 Edge Band Clamp (Model KEBC100) is an edge banding clamp designed for securing edge banding and trim while you align it accurately. This is a clamp designed for edge banding and trim work on woodworking and cabinetry projects.

The stretchable band is made to grip edge banding securely and conform to different profiles, which helps keep pressure even without denting or crushing the edge you are trying to protect. On real parts, that means fewer lift spots and less rework when you start trimming flush.

Pivoting jaws keep the pads in full contact across varying material thicknesses, so the clamp stays planted instead of levering off the edge. Kreg uses GripMaxx non-marring pads to hold firm without chewing up finished surfaces, which matters when you are clamping prefinished plywood or veneered panels.

These are built for fast setup. The one-handed design makes it easier to place multiple clamps quickly, especially on long edges where you are leapfrogging clamps as you work down the panel.

The band and pads are glue-resistant, so dried glue can peel off instead of permanently bonding the clamp to your work. When you are not doing edge banding, the band can be removed so the clamp can be used for other one-handed clamping tasks within its capacity.

If you do cabinets, built-ins, furniture, or any shop work where edge banding is a regular chore, the Kreg KEBC100 Edge Band Clamp is a simple upgrade that helps you clamp faster and keep alignment where you put it.

Clamp Edge Banding Without the Wrestling Match

Edge banding is all about holding alignment while the glue grabs. This clamp is designed to keep your hands free for positioning, so you can get the band where it needs to be and lock it down quickly.

• One-handed design for faster setup and repositioning
• Stretchable band conforms to different profiles for secure grip

Full Pad Contact on Different Thicknesses

Uneven pressure is what causes edge banding to lift and leaves you with a mess when you trim. Pivoting jaws help the pads sit flat so the clamp stays stable and pressure stays where you need it.

• Pivoting jaws automatically adjust for better contact
• GripMaxx non-marring pads help prevent slipping and surface damage

Kreg KEBC100 Edge Band Clamp Setup, Fast and Clean

These are purpose-built for edge banding, but they are not one-trick clamps. Remove the band and you can use them for a range of quick one-handed clamping jobs within the jaw capacity.

• Glue-resistant band and pads for easier cleanup
• Removable band expands clamping applications

What’s in the Box

• (2) Edge Band Clamps
• (1) Owner’s Manual

Key Specifications

Max Jaw Opening	2 in
Throat Depth (band removed)	1.5 in
Max Trim Thickness	Up to 1 in
Max Workpiece Width	Up to 2 in

Built For

Cabinetry Woodworking Furniture building Edge banding Trim and small glue-ups

Pro Tip

When you are not edge banding, pull the band off and use the clamp as a quick one-handed clamp for small assemblies. It is a handy way to get a third hand at the bench.

Tool Nut’s Take

Tool Nut’s Take

Kreg KEBC100 Edge Band Clamp: the clamp that makes edge banding less annoying

It is built to hold edge banding straight with even pressure, without beating up finished surfaces.

• Who it’s for: Cabinet builders, furniture makers, and anyone who does edge banding and wants faster setup and better alignment.
• Why it stands out: The stretch band and pivoting jaws help keep consistent contact on different profiles and thicknesses, and the pads are non-marring.
• Worth knowing: Capacity is aimed at edge banding and trim work, not wide panel glue-ups.

Common Questions

• What size material can this clamp handle for edge banding or trim? It can clamp edge banding or trim up to 1 inch thick on workpieces up to 2 inches wide.
• What is the maximum jaw opening? The maximum jaw opening is 2 inches.
• Can it be used as a general one-handed clamp? Yes. The band is removable for additional one-handed clamping applications.