Description

Key Features

No Compressor Needed

This Milwaukee M18 FUEL 18 Gauge Brad Nailer Kit gives you pneumatic-style fastening without dragging around a hose, compressor, or gas cartridge. That means faster setup, easier punch-list work, and less gear to move room to room.

Zero Ramp-Up Firing

The POWERSTATE brushless motor and nitrogen air spring mechanism deliver nails with no spin-up delay. When you pull the trigger, it is ready, which matters when you are installing trim, casing, and base at a steady pace.

Compact Jobsite Fit

At 11.9 inches long and about 6.3 pounds, this 18 gauge brad nailer is built to get into cabinets, corners, and other tight finish spaces without feeling bulky in your hand.

Overview

The Milwaukee M18 FUEL 18 Gauge Brad Nailer Kit, model 2746-21CT, is a cordless finish nailer built for trim work, punch-list work, and interior fastening where speed and clean results matter. This is a cordless 18 gauge brad nailer designed for finish carpentry and trim installation. If you want pneumatic-style performance without hauling a compressor and hose through a house, this is the whole point of this tool.

Milwaukee uses a sealed compressed nitrogen air spring mechanism along with its POWERSTATE brushless motor to drive nails with zero ramp-up time. On the job, that means the tool fires when you need it instead of waiting for a flywheel to catch up. It is built to consistently sink brads to the proper depth in both hard and soft woods while leaving clean nail holes that match the nail head size, which helps when you are doing casing, baseboard, crown details, cabinet trim, and other finish work where appearance matters.

The Milwaukee M18 FUEL 18 Gauge Brad Nailer Kit is also set up to keep you moving instead of stopping for adjustments. Tool-free depth adjustment makes it easier to fine-tune fastening based on material and trim profile. A tool-free jam clearing latch cuts downtime when a fastener hangs up. Dry fire lockout helps prevent unnecessary marks on the work surface when the magazine runs low. Milwaukee also gives you both sequential and contact actuation firing modes, so you can slow down for precise placement or speed up when you are running a line of trim.

From a design standpoint, this nailer is compact and practical. The body measures 11.9 inches long, 11.1 inches high, and 3.3 inches wide, with a working weight around 6.3 pounds. That compact footprint matters in tight rooms, inside built-ins, and around installed cabinets where a larger tool gets awkward fast. The reinforced nylon housing is built for jobsite use, and the adjustable reversible belt hook gives you a place to park it when you are moving ladders, setting material, or switching tasks.

For real-world jobsite use, the cordless format is the big advantage. No hose means less setup, fewer snags around furniture and finished walls, and better mobility for remodelers working in occupied spaces. No gas cartridge also means you avoid the added cost and maintenance that come with gas-driven nailers. The built-in LED work light helps when you are fastening in closets, hallways, stairwells, or under cabinet runs where lighting is not great.

This kit runs on the Milwaukee M18 battery platform and includes one M18 REDLITHIUM CP2.0 battery along with an M18 and M12 multi-voltage charger. That is a practical setup for current Milwaukee users because the nailer drops into an established cordless system instead of becoming a one-off tool. For contractors already on M18, it is easy to keep this finish nailer in rotation with the same batteries used across the rest of the platform.

It is designed for 18 gauge brad nails in a 5/8 inch to 2-1/8 inch length range and uses a strip-style magazine with a 110 nail capacity. That makes it a strong fit for finish carpenters, remodelers, cabinet installers, punch-out crews, and serious DIY users doing detailed wood trim and interior finish work. If your work depends on clean fastening, quick setup, and the freedom to move without an air hose, this is the kind of cordless brad nailer that earns its keep fast.

Milwaukee M18 FUEL 18 Gauge Brad Nailer Kit Delivers Cordless Finish Work

This cordless brad nailer is built for finish work where dragging an air hose is more trouble than the actual nailing. You get the freedom of a battery platform tool without giving up the response and consistency that trim work demands.

• POWERSTATE brushless motor for fast firing response
• Zero ramp-up time for efficient fastening from nail to nail

Dial In Depth and Keep Moving

Finish nailers are only as useful as their ability to adapt to different materials. This one gives you practical controls that help you match the tool to hardwood, softwood, and delicate finished surfaces without wasting time.

• Tool-free drive depth adjustment for quick changes between materials
• Dry fire lockout helps prevent unwanted marks when the magazine runs empty

Built for Tight Finish Spaces

Compact size matters when you are working around installed cabinets, corners, built-ins, or inside finished rooms. This nailer stays manageable in hand and gives you a clear working end for accurate brad placement.

• 11.9 inch overall length helps with access in confined areas
• LED work light improves visibility in dim interior work zones

Ready as a Complete Kit

This kit is set up so you can get the nailer into rotation right away. For new Milwaukee users, it gives you the core pieces to start. For current M18 users, it adds a finish nailer without needing to source the basics separately.

• Includes one M18 REDLITHIUM CP2.0 battery and multi-voltage charger
• Contractor bag and reversible belt hook included for transport and carry

What’s in the Box

• (1) Milwaukee M18 FUEL 18 Gauge Brad Nailer, 2746-20
• (1) M18 REDLITHIUM CP2.0 Battery Pack
• (1) M18 and M12 Multi-Voltage Charger
• (1) Reversible Belt Hook
• (1) Contractor Bag

Key Specifications

Battery Platform	M18
Tool Type	18 Gauge Brad Nailer
Power Source	Cordless
Motor Type	POWERSTATE Brushless
Fastener Length Range	5/8 in to 2-1/8 in
Magazine Capacity	110
Length	11.9 in
Weight	6.3 lb

Compatibility

Battery Platform

Compatible with the Milwaukee M18 battery system.

Charger

Kit includes an M18 and M12 multi-voltage charger.

Fasteners

Designed for 18 gauge brad nails in 5/8 inch to 2-1/8 inch lengths.

Built For

Finish Carpentry Trim Installation Remodeling Cabinet Work Punch-List Work Interior Woodworking

Pro Tip

Before moving from soft trim to hardwood casing, take a second to reset the tool-free depth adjustment instead of forcing every nail flush with filler. It is the quickest way to keep nail holes clean and avoid overdriving on finished material.

Warranty & Support

5 Year tool warranty and 2 Year battery warranty.

Tool Nut’s Take

Tool Nut’s Take

One of the easiest ways to ditch the hose

The Milwaukee M18 FUEL 18 Gauge Brad Nailer Kit is a smart buy for anyone doing real trim work and wants cordless convenience without giving up clean, reliable fastening.

• Who it’s for: Finish carpenters, remodelers, cabinet installers, and serious DIY users handling interior trim, casing, base, and punch-out work.
• Why it stands out: Zero ramp-up time, no gas cartridge, tool-free adjustments, and M18 platform compatibility make it practical on the job, not just good on paper.
• Worth knowing: This is an 18 gauge brad nailer, so it is meant for finish fastening and detail work, not heavier framing or structural nailing.

Common Questions

• What kind of nails does this nailer use? It is designed for 18 gauge brad nails in lengths from 5/8 inch to 2-1/8 inch.
• Does it need a compressor or gas cartridge? No. It is a cordless nailer that uses an M18 battery and sealed compressed nitrogen, so there is no compressor, hose, or gas cartridge required.
• Can it switch between precision and faster firing? Yes. It has sequential and contact actuation firing modes for controlled placement or quicker repetitive fastening.
• What battery system does it use? It runs on the Milwaukee M18 battery platform.