Description

Key Features

Drawer Storage That Stays Put

The 4-drawer tool box uses a locking security bar to keep drawers shut during transport. That matters when the box is loaded and moving between the truck, shop, and jobsite.

Small Parts Stay Organized

The low-profile organizer has 10 removable bins, removable dividers, and a no-travel lid design. It helps keep screws, anchors, terminals, and other small parts from shifting into the wrong compartment.

Built Into PACKOUT

This Milwaukee storage combo ties into the PACKOUT modular storage system, so you can stack it with other PACKOUT boxes and organizers instead of managing loose cases.

Overview

The Milwaukee 48-22-8444 PACKOUT 4-Drawer Tool Box + 48-22-8431 PACKOUT Low-Profile Organizer is a modular storage combo built for tradespeople who need better tool organization and faster access to small parts. This is a storage system combo designed for tool, accessory, and small-parts organization and transport. Model Numbers: 48-22-8444 and 48-22-8431. If you are already working out of PACKOUT or want a cleaner way to separate hand tools, hardware, bits, blades, and electrical connectors, this setup gives you two very different storage formats that work together.

The 4-drawer tool box handles the heavier daily-use side of the job. Milwaukee rates it for a 50 lb weight capacity, and the locking security bar keeps all four drawers closed during transport. That is the feature that really makes a drawer box practical on the job. Without it, drawers can creep open when the box gets bounced around in a van or trailer. Add the all-metal ball-bearing slides and metal-reinforced corners, and this box is clearly aimed at jobsite use rather than light shop storage.

The low-profile organizer covers the stuff that usually gets lost first: fasteners, anchors, wire connectors, specialty bits, blades, and other small parts. Milwaukee builds it with 10 removable bins, including 8 small bins and 2 large bins, plus removable dividers so you can tune the layout to the way you work. The clear top helps you identify contents without opening the case, and the no-travel lid design helps stop parts from migrating between compartments. That saves time because you are not sorting mixed hardware every time you open it.

From a build standpoint, both pieces lean hard into durability. Milwaukee calls out impact-resistant polymers on both units, and the organizer adds heavy-duty latches and a reinforced hinge. The organizer also carries an IP65 rated weather seal, which matters if your storage rides in the back of a truck or gets used outside. It is not just about rain. Dust and general jobsite debris are what ruin organization systems over time, and a sealed organizer holds up better when conditions are not clean.

Because both pieces are part of the PACKOUT modular storage system, the bigger value here is not just the individual boxes. It is the platform. The 4-drawer tool box gives you quick pull-out access without unstacking everything, while the low-profile organizer gives you a dedicated place for smaller consumables that should never be floating loose in a drawer. Together, they make a lot of sense for electricians, service techs, remodelers, installers, and general contractors who want one stack for tools and another level for parts.

This combo is a strong fit for anyone who needs a more organized mobile setup and already sees the benefit of modular storage. If you mainly store bulky power tools, you may want to add deeper PACKOUT boxes around it. But if your day-to-day work depends on keeping hand tools separated from hardware and keeping small items visible and contained, this Milwaukee PACKOUT setup solves a real jobsite problem without overcomplicating it.

Fast Access Without Unstacking Everything

The drawer box is the part of this setup you will appreciate every day. Instead of opening a top-lid box and digging, you get direct access to stored tools and accessories through four drawers.

• Locking security bar keeps drawers shut during transport
• 50 lb rated capacity for loaded daily-use storage
• All-metal ball-bearing slides help drawers open smoothly under load
• Includes 4 sets of quick-adjust dividers for custom drawer layouts

Keep Small Parts Sorted and Visible

The organizer is built for the parts that slow you down when they are loose. Separate bins, a clear lid, and a low-profile format make it easier to carry more variety without creating a mess.

• 10 removable bins with 8 small and 2 large bin sizes
• Removable dividers help tailor compartments to hardware and accessories
• No-travel lid design helps stop parts from shifting between bins
• Integrated center slot fits longer bits and blades

One Storage Platform, Two Useful Formats

This combo works because it covers both sides of organization: drawer storage for tools and sealed compartment storage for parts. If you are building out a mobile PACKOUT stack, these two pieces complement each other well.

• Both pieces are part of the PACKOUT modular storage system
• Impact-resistant materials are built for jobsite transport
• Organizer adds IP65 weather protection against rain and debris
• Useful mix for service work, installation, and punch-list tasks

What’s in the Box

• (1) Milwaukee PACKOUT 4-Drawer Tool Box
• (4) Quick-Adjust Divider Sets
• (1) Milwaukee PACKOUT Low-Profile Organizer

Key Specifications

Drawer Box Capacity	50 lbs
Organizer Weather Rating	IP65
Organizer Bins	10 removable bins
Bin Configuration	8 small bins, 2 large bins
Drawer Dividers Included	4 sets of quick-adjust dividers
Product Weight	28.8 lb
Body Material	Impact-resistant polymers
Storage Platform	Milwaukee PACKOUT Modular Storage System

Compatibility

PACKOUT Platform

Both the 4-drawer tool box and the low-profile organizer are part of the Milwaukee PACKOUT modular storage system.

Modular Connectivity

The 4-drawer tool box is listed as having modular connectivity with all PACKOUT components.

Accessory Storage

The organizer includes an integrated center slot sized for longer bits and blades.

Built For

Electrical HVAC Plumbing General Contracting Remodeling Service Work Small Parts Organization Mobile Tool Storage

Pro Tip

Use the low-profile organizer for the consumables you reach for every day and keep the 4-drawer box dedicated to tools and bigger accessories. That way you are not opening drawers full of loose hardware, and restocking small parts at the end of the day is a lot faster.

Tool Nut’s Take

Tool Nut’s Take

Milwaukee 48-22-8444 PACKOUT 4-Drawer Tool Box + 48-22-8431 PACKOUT Low-Profile Organizer is a smart PACKOUT pairing

This is the kind of combo that makes a PACKOUT setup more usable, not just bigger.

• Who it’s for: Pros and serious DIYers who need one place for hand tools plus a separate, sealed organizer for hardware, connectors, bits, and small accessories.
• Why it stands out: The drawer box gives you real access without tearing apart your stack, and the organizer keeps the little stuff from mixing together or disappearing.
• Worth knowing: This is storage-first, not bulk-tool storage. It shines when organization matters more than just tossing everything into one big box.

Common Questions

• Is this part of Milwaukee PACKOUT? Yes. Both pieces are part of the Milwaukee PACKOUT modular storage system.
• How much weight can the 4-drawer tool box hold? Milwaukee lists the 4-drawer tool box with a 50 lb weight capacity.
• How many bins are in the low-profile organizer? The organizer includes 10 removable bins, made up of 8 small bins and 2 large bins.
• Does the organizer help keep parts from moving between compartments? Yes. Milwaukee calls out a no-travel lid design that helps prevent small part migration between bins.