Description

Key Features

Steel Post Upgrade

The Simpson Strong-Tie PGT2A Pipe Grip Tie lets you fasten wood fence rails to a 2-3/8 inch outside diameter metal post, so you can replace rotted wood posts without rebuilding the whole fence.

G90 Galvanized

The 14-gauge steel body uses a zinc galvanized G90 finish for corrosion resistance. That matters outdoors where fence hardware stays exposed year-round.

Handles Corners

You can field bend the flanges one time to fit corner or angled fence runs. That gives you more flexibility when the fence line is not perfectly straight.

Overview

The Simpson Strong-Tie PGT2A Pipe Grip Tie is a fence connector designed to attach wood fence rails to metal fence posts. This is a pipe grip tie designed for wood-to-metal fence rail connections in new fence construction and post replacement work. Model Number: PGT2A. It is built for fences that need the look of wood rails with the longer service life of galvanized steel posts.

For this specific model, the fit is straightforward: it is made for 2 inch nominal pipe with a 2-3/8 inch outside diameter. That is the sizing detail that matters most, because a fence tie either matches the post correctly or it does not. When paired with the specified fasteners, the PGT2A creates a solid mechanical connection between the rail and the pipe post without relying on a traditional wood post at that location.

The body is made from 14-gauge steel with a zinc galvanized G90 finish. In real terms, that means you are getting a connector intended for outdoor exposure and everyday fence duty, while keeping installation simple. The galvanized finish helps resist corrosion, and the steel body gives the tie enough stiffness to hold the rail securely against the pipe post.

Installation is quick compared to replacing failed wood posts. The tie wraps around the vertical pipe and tightens with the included 1/4 inch hex-head bolt. The rail side fastens with (4) 1/4 inch x 1-1/2 inch Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws, which are not included. That hardware layout is important because it gives you a defined fastening pattern instead of improvising with generic screws on the jobsite.

One of the practical advantages of the Simpson Strong-Tie PGT2A Pipe Grip Tie is flexibility in layout. It can be used in standard straight runs, and the flanges can be field bent one time for corner or angled fence conditions. If you are tying into a 45 degree or 90 degree section, that saves time and lets you keep the metal post system consistent across the whole fence.

This connector also solves a common fence repair problem. When a wood post fails from moisture and ground contact, the rails and pickets may still be worth saving. Swapping to a metal post and using pipe grip ties can extend fence life without changing the finished wood appearance from the yard side. That is why this style of hardware is popular for both repair work and new builds.

The PGT2A is best suited for fence builders, remodelers, property maintenance crews, and serious DIY users who want a cleaner way to connect wood rails to steel pipe posts. If your project uses 2-3/8 inch outside diameter posts and wood rails, this is the right type of connector to keep the build simple, repeatable, and durable.

Built for Real Fence Repairs

If you are replacing failed wood posts, this connector gives you a practical path to keep wood rails while moving to metal support posts.

• Designed for wood fence rails attached to metal fence posts
• Ideal for replacing damaged wood posts or building a new fence with steel posts

Fits Common 2-3/8 Inch Fence Pipe

The main buying checkpoint here is pipe size. The PGT2A is made for a 2 inch nominal post with a 2-3/8 inch outside diameter, so fit stays simple and predictable.

• Pipe diameter: 2-3/8 in. outside diameter
• Overall width: 6-5/8 in.

Adapt Around Corners and Angles

Fence lines are not always straight. The PGT2A can be field bent one time, which helps when you need to carry the same connector through corner and angled sections.

• Suitable for standard runs as well as corner or angled conditions
• Flanges can be field bent one time only

What’s in the Box

• (1) Simpson Strong-Tie PGT2A Pipe Grip Tie
• (1) 1/4 in. hex-head bolt

Rail attachment screws are not included. The tie installs to the wood rail with (4) 1/4 in. x 1-1/2 in. Strong-Drive SDS Heavy-Duty Connector screws.

Key Specifications

Application	Fencing
Pipe Diameter	2-3/8 in. outside diameter
Material	14-gauge steel
Finish	Zinc Galvanized, G90
Width (in.)	6-5/8 in.
Height (in.)	1-1/4 in.
Required Rail Fasteners	(4) 1/4 in. x 1-1/2 in. Strong-Drive SDS Heavy-Duty Connector screws
Packaging Quantity	1

Compatibility

Post Size

Fits 2 inch nominal metal fence posts with a 2-3/8 inch outside diameter.

Rail Material

Designed to connect wood fence rails to metal posts.

Fastener Requirement

Attaches to rails with (4) 1/4 in. x 1-1/2 in. Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws. One hex-head bolt is supplied for the post connection.

Built For

Fencing Fence Repair New Fence Construction General Contracting Property Maintenance DIY / Hobbyist

Pro Tip

When you lay out a fence run with the PGT2A, line your posts to a stringline first and plan on using three to four ties per pipe. If you need to tweak for a corner or angle, bend the flange once and stop there.

Tool Nut’s Take

Tool Nut’s Take

Simpson Strong-Tie PGT2A Pipe Grip Tie Keeps Fence Repairs Simple

This is the kind of small hardware that saves a bigger job by letting you move from failing wood posts to steel posts without giving up wood rails.

• Who it’s for: Fence contractors, repair crews, and homeowners rebuilding sections of fence around 2-3/8 inch outside diameter steel posts.
• Why it stands out: Correct post fit, galvanized 14-gauge steel, and the ability to handle straight runs plus corner or angled sections.
• Worth knowing: This is sold as a single connector with one bolt supplied, and you still need the four rail screws to complete each installation.

Common Questions

• What post size does the PGT2A fit? It fits 2 inch nominal pipe with a 2-3/8 inch outside diameter.
• Can it be used for corner fence sections? Yes. The flanges can be field bent one time for corner or angled conditions.
• What screws are required for the rail connection? Simpson specifies (4) 1/4 in. x 1-1/2 in. Strong-Drive SDS Heavy-Duty Connector screws for attaching the tie to the wood rail.
• Is the post bolt included? Yes. One 1/4 inch hex-head bolt is supplied with the connector.