Description

Key Features

Drives Fast

The SawTooth point starts quickly and usually eliminates predrilling in wood-to-wood work. That means less effort on the trigger and faster progress when you are running a lot of fasteners.

Built for Exterior Wood

Double-barrier coating gives this timber screw corrosion resistance equivalent to hot-dip galvanization for certain exterior and preservative-treated wood applications described in the evaluation report.

Strong Hold, Clean Finish

Bold threads deliver strong holding power, while the large washer head and underhead nibs help the head seat flush with less splintering. You get structural bite without the fuss of old-school lag screws.

Overview

The Simpson Strong-Tie SDWS22500DB Strong-Drive SDWS Timber Screw is a structural exterior wood screw built for wood-to-wood fastening in framing, ledger, and heavy timber connections. This is a wood screw designed for structural wood-to-wood fastening. Model Number SDWS22500DB. In this version, you are getting the 5 inch tan screw with double-barrier coating in a 600-count package.

What matters here is installation speed without giving up holding power. Simpson uses a SawTooth point that starts fast, cuts into wood cleanly, and reduces installation torque, so in most applications you can skip predrilling. If you are fastening ledgers, posts, rails, or other heavy wood members, that saves real time compared to traditional lag screws and through-bolting setups.

The thread and head design are doing a lot of the work. The bold thread pattern is built to grab aggressively in wood for strong pull-through resistance and solid clamping. Up top, the large washer head spreads the load over a wider area, which helps when you need solid bearing on dimensional lumber and structural members. Underhead nibs help the head seat flush with reduced splintering, so the finished connection looks cleaner and the hardware sits properly in the surface.

Drive engagement is another place where this screw makes sense on the job. The T40 6-lobe drive gives you a more secure bit-to-fastener fit than a basic slot or Phillips style recess, which means less cam-out and less wasted motion when driving long structural screws. That is especially helpful when you are working overhead, on a ladder, or running repeated fasteners into dense framing material.

For exterior use, the coating is the key detail. The double-barrier coating is rated for corrosion resistance equivalent to hot-dip galvanization, making the screw suitable for certain exterior and preservative-treated wood applications as described by Simpson Strong-Tie. If you are building outdoors and want a structural fastener that is easier to install than a lag, this is the detail that makes it relevant.

The Simpson Strong-Tie SDWS22500DB Strong-Drive SDWS Timber Screw is also code-oriented hardware, not just a generic construction screw. Simpson lists it for structural wood-to-wood and engineered wood applications, including ledgers and some mass timber connections such as CLT wall-to-wall, floor-to-floor, surface splines, and lap joints. That makes it a better fit for serious deck builders, framers, remodelers, and contractors who need a fastener with documented structural intent.

From a sizing standpoint, this model uses a 0.220 inch shank diameter, 0.760 inch head diameter, 5 inch overall length, and 3 inch thread length. Those numbers matter because they place it squarely in the heavy-duty wood fastening category, where you need deeper penetration and stronger pull than a standard deck screw can provide.

Who should buy it? Contractors and serious DIY builders working on exterior framing, deck ledgers, pergolas, planter boxes, fences, and similar wood structures. If you want a structural screw that drives faster than a lag, holds hard, and is built for outdoor wood applications, this is the right kind of fastener.

Faster Structural Wood Fastening

This screw is built to move faster through wood framing and outdoor structures without turning the job into a predrill-and-wrench routine.

• SawTooth point helps the screw start quickly in wood
• Reduced installation torque means less strain when driving repeated fasteners
• Designed as an easier-to-install alternative to through-bolting and traditional lag screws

Better Bite in Outdoor Builds

When the connection matters, the geometry of the screw matters too. The bold thread is meant to lock into wood and hold.

• Application: fastening wood to wood
• Bold thread design provides strong holding power
• Suitable for structural wood-to-wood and engineered wood applications including ledgers

Flush Seating Without Beating Up the Surface

The head design is made for structural clamping and a clean finished surface, which is what you want in visible outdoor work.

• Large washer head provides broad bearing area
• Head diameter: 0.760 in.
• Underhead nibs help the head drive flush with reduced splintering

Made for Exterior Structural Projects

This is where the coating earns its keep. Outdoor structural wood projects need corrosion resistance, not just drive speed.

• Double-barrier coating for certain exterior and preservative-treated wood applications
• Corrosion resistance equivalent to hot-dip galvanization
• Common fit for pergolas, deck work, rails, and exterior framing connections

What’s in the Box

• (600) Simpson Strong-Tie SDWS22500DB 5 in. Strong-Drive SDWS Timber Screws, tan, double-barrier coated

Key Specifications

Fastener Type	Structural wood screw
Application	Wood-to-wood fastening
Length	5 in.
Shank Diameter	0.220 in.
Head Diameter	0.760 in.
Head Type	Washer head
Drive Type	T40 6-lobe
Thread Length	3 in.
Point Type	SawTooth point
Coating	Double-barrier coating
Color	Tan
Package Quantity	600

Compatibility

Driver Interface

Uses a T40 6-lobe drive for positive engagement during installation.

Replacement Bit

Replacement driver bit reference: BIT40T-134-R2.

Material Match

Designed for wood-to-wood and engineered wood connections, including ledgers and certain mass timber applications listed by Simpson Strong-Tie.

Built For

Deck Building Exterior Framing Pergolas Fencing Ledger Fastening Mass Timber Connections General Contracting Serious DIY Outdoor Projects

Pro Tip

Use a fresh T40 bit and keep the driver square to the washer head when starting long screws. That 6-lobe recess holds well, but staying straight at the start helps the screw track cleaner and seat flush with less surface tear-out.

Tool Nut’s Take

Tool Nut’s Take

Simpson Strong-Tie SDWS22500DB Strong-Drive SDWS Timber Screw is the lag screw shortcut most builders actually want

If you are doing serious exterior wood fastening and do not want to waste time fighting old-school lag hardware, this screw makes a strong case for itself.

• Who it’s for: Deck builders, framers, remodelers, fence crews, and DIYers building outdoor structures with real structural connections.
• Why it stands out: Fast starts, strong thread bite, a large washer head, and exterior-rated coating all work together to make installation quicker without turning it into a compromise fastener.
• Worth knowing: This is a 600-pack of 5 inch screws, so it makes the most sense when you have enough work to justify the bulk count and you already have the right T40 setup on hand.

Common Questions

• What is this screw designed for? It is designed for structural wood-to-wood and engineered wood fastening, including ledger applications and certain listed mass timber connections.
• Do I usually need to predrill? Simpson states the SawTooth point reduces installation torque and eliminates the need for predrilling in most applications.
• What driver size does it use? It uses a T40 6-lobe drive.
• Is it suitable for exterior use? Yes, it has a double-barrier coating with corrosion resistance equivalent to hot-dip galvanization for certain exterior and preservative-treated wood applications described by Simpson Strong-Tie.