Description

Key Features

Torsion Zone Protection

The Impact Ball torsion design helps absorb shock from an impact driver. That matters when you are driving fasteners all day and want better bit life instead of chewing through tips.

Five Common Tips

You get Phillips #2, square #2, Torx T20, Torx T25, and 6 mm slotted bits in one pack. It covers a practical spread of fastening work without making you buy separate singles.

Built for Impact Drivers

This Vessel bit set is made for use in impact drivers, not just light-duty drilling. The 1/4 inch hex shank and impact-focused design make it a better match for repeated high-torque fastening.

Overview

The Vessel IBMG90K002 Impact Ball Torsion Bit Set is a 5-piece impact driver bit set from Vessel Tool. This is a torsion bit set designed for impact driver fastening. Model Number: IBMG90K002. If you want a compact set of longer driver bits for common screw types, this one is built around the tips you are most likely to reach for on real work.

What makes this set different is the Impact Ball torsion design. Vessel shows a dedicated torsion zone that absorbs shock, which is the whole point of a good impact-rated bit. On the job, that means the bit is better suited to repeated impact pulses instead of taking every hit straight at the tip. That can help reduce breakage and slow down tip wear when you are driving screws with an impact driver instead of a standard drill.

The included bit selection is practical, not padded. You get Phillips #2, square #2, Torx T20, Torx T25, and a 6 mm slotted bit. All five bits are 3-1/2 inches, or 90 mm, long. That extra length helps when the chuck or nose of the tool would otherwise crowd the fastener, and it gives you better reach into hardware, trim, cabinets, utility installs, and other spots where short insert bits are awkward.

Vessel also calls out hardness up to HRC 62 by VoHA, with the package noting that the slotted size is excluded from that claim. In plain terms, this set is aimed at users who care about a hard-wearing tip and want bits made for repeated fastening work. The package also states it is for impact drivers and uses a standard 1/4 inch interface, so it fits the tool category it is intended for without needing a special holder format.

One smart detail here is the included Mag Charge magnetizer. It lets you magnetize or demagnetize by friction, which is useful when you need a screw to stay on the tip for overhead work, one-handed starts, or tighter spaces. Just as important, you can remove the magnetism when you do not want screws or small metal debris clinging to the bit.

This set makes the most sense for tradespeople and serious DIY users doing general fastening with an impact driver. Carpenters, remodelers, installers, maintenance techs, and homeowners who want a compact, useful assortment will get the value here. It is not a giant master kit, and that is actually the point. The Vessel IBMG90K002 Impact Ball Torsion Bit Set focuses on five common profiles, longer reach, and impact-ready construction instead of filling the package with sizes you will rarely touch.

Drive Screws with Better Shock Control

Impact drivers hit hard and fast. A torsion bit is meant to deal with that punishment better than a basic driver bit, especially when you are running a lot of fasteners in framing, repairs, or assembly work.

• Made for impact driver use
• Impact Ball torsion zone is designed to absorb shock

Get the Tips You Actually Use

This is a useful five-piece mix, not a filler set. The included profiles line up with common wood, hardware, and general fastening tasks, and the 90 mm length gives you a little more room to work.

• Includes Phillips #2, square #2, Torx T20, Torx T25, and 6 mm slotted
• Each bit is 3-1/2 inches, or 90 mm, long

Magnetize Only When You Need It

The included Mag Charge tool is one of those small extras that ends up being genuinely handy. Add magnetism when you want better screw retention, then remove it when you need a clean bit that is not picking up metal shavings.

• Magnetizes and demagnetizes by friction
• Useful for overhead starts, tight spaces, and one-handed screw placement

Engineered for Repeated Impact Use

The torsion zone is the working part of the design. Instead of making the bit completely rigid, Vessel builds in controlled flex where impact force can be managed more effectively.

• Designed to absorb impact shock
• Helps support bit durability in high-torque fastening applications

What’s in the Box

• (1) Phillips #2 x 90 mm impact torsion bit
• (1) Square #2 x 90 mm impact torsion bit
• (1) Torx T20 x 90 mm impact torsion bit
• (1) Torx T25 x 90 mm impact torsion bit
• (1) 6 mm slotted x 90 mm impact torsion bit
• (1) Mag Charge magnetizer

At a Glance

5

Pieces

90 mm

Bit Length

HRC 62

Hardness Claim

Key Specifications

Piece Count	5
Bit Length	3-1/2 in. (90 mm)
Shank Type	1/4 in. hex
Bit Types Included	Phillips #2, Square #2, Torx T20, Torx T25, 6 mm slotted
Tool Type	Impact torsion bit set
Hardness	HRC 62 by VoHA except slotted size
Magnetizer Included	Yes
Made In	Japan

Compatibility

Bit Interface

Standard 1/4 inch hex shank

Tool Match

Designed for impact driver use

Built For

Carpentry Construction Remodeling General Fastening Impact Driver Users DIY / Hobbyist

Pro Tip

Use the Mag Charge tool only when the job calls for screw hold. For finish hardware or dirty jobsite conditions, demagnetizing the bit can keep metal debris from sticking where you do not want it.

Tool Nut’s Take

Tool Nut’s Take

Vessel IBMG90K002 Impact Ball Torsion Bit Set is a smart everyday impact bit pack

This is the kind of set that earns a spot in the bag because it covers common fasteners, gives you useful 90 mm reach, and adds a magnetizer you will actually use.

• Who it’s for: Anyone running an impact driver for general fastening, especially carpenters, remodelers, installers, and serious DIY users.
• Why it stands out: The torsion-zone design is made for impact use, the tip mix is practical, and the included Mag Charge feature is a nice real-world bonus.
• Worth knowing: This is a focused 5-piece set, not a giant assortment. If these are your go-to tip styles, that is a good thing.

Common Questions

• Is this set made for an impact driver? Yes. The packaging specifically states it is for impact driver use.
• What bit length do you get? Each included bit is 3-1/2 inches, or 90 mm, long.
• Can the bits be magnetized? Yes. The included Mag Charge tool is used to magnetize or demagnetize the bits by friction.
• What tip profiles are included? The set includes Phillips #2, square #2, Torx T20, Torx T25, and 6 mm slotted.