Description

Key Features

Removable Side Pouches

The included tool pouch and drill holster can come off the bag and clip to a belt or trouser pocket. That makes ladder work and service calls easier when you only need a few tools in reach.

Compact Closed-Top Storage

This Veto Pro Pac SP-LD Closed Top Tool Pouch keeps tools, meters, and small gear protected inside a compact footprint. The top flap and two-way access pocket help you get to what you need without dumping the whole bag.

Built for Jobsite Wear

A waterproof polypropylene base, tarpaulin-covered rear pocket, and YKK zippers give this pouch the kind of durability that matters when it lives in a van, on concrete, or around wet mechanical rooms.

Overview

The Veto Pro Pac SP-LD Closed Top Tool Pouch is a compact service tool bag built for techs who need organized storage without carrying a full-size tote. This is a closed-top tool pouch designed for service work, troubleshooting, and mobile tool organization. Model Number: VPP10935. If your work involves meters, hand tools, small parts, and a drill that need to stay protected and easy to grab, this layout makes a lot of sense.

The main compartment is sized to hold a variety of tools, meters, and equipment, but the real advantage is how access is handled. The top-down flap includes a zippered two-way access pocket that can be reached from the inside or the outside of the bag. That gives you one more spot for the items you grab all the time without having to open up the whole pouch and dig around.

Where this bag separates itself from a basic tool pouch is the removable side storage. One side pouch works as a dedicated tool pouch with pockets for screwdrivers, pliers, thru-pockets, pencil pockets, a stainless steel tape measure clip, and an electrical tape strap. The other side is a removable drill holster that fits drills from 12 volt to 18 volt, adds four drill bit pockets, includes its own tape measure clip, and can use an optional lanyard to keep the drill secure. Those side pouches can clip to a waist belt or trouser pocket, which is especially useful when you are on a ladder and do not want to bring the whole bag up with you.

The SP-LD also uses Veto Pro Pac’s V-SWAP interchangeable panel system. It includes a Rear 9-Pocket panel and a Front Tool panel, and additional panels are sold separately. That matters because it lets you tune the inside of the bag around the kind of service work you actually do, whether that means carrying more hand tools, more test gear, or a different mix depending on the day.

On the durability side, Veto did not treat this like a light-duty organizer. The tarpaulin-covered rear pocket adds weather and abrasion protection where the bag tends to rub against rough surfaces. The waterproof polypropylene plastic base helps keep the bottom off wet floors and protects the bag from moisture and wear. Add in YKK zippers and a detachable over-molded elastomeric grip, and you get a pouch that is meant to be carried daily instead of occasionally.

Capacity is practical for a compact bag. It measures 13 inches high, 13.5 inches wide, and 8.5 inches deep, with an internal volume of 480 cubic inches or 7.9 liters. Empty weight is 4.8 pounds, and max payload is 25 pounds. In plain terms, it is large enough to be useful for serious electrical, HVAC, maintenance, and service calls, but still compact enough to move through finished spaces, climb ladders, and ride in the passenger seat without becoming a giant catch-all.

This tool pouch is a strong fit for electricians, HVAC techs, maintenance pros, low-voltage installers, and service plumbers who want better organization than an open tote gives them. It is also a smart choice for anyone who works in occupied buildings and wants tools covered, organized, and easy to carry from call to call. If you like modular storage and want a compact bag that can also stage a drill and a small kit at the point of work, this is the kind of setup that earns its keep fast.

Carry the Bag, Then Strip It Down for the Task

The SP-LD works well for techs who move between a main bag and point-of-work carry. Bring the full pouch to the room, then take only the tool pouch or drill holster up the ladder or into a tight service area.

• Includes one removable tool pouch and one removable drill holster
• Side pouches can clip to a waist belt or trouser pocket
• Drill holster fits 12 volt to 18 volt drills

Compact Size Without Giving Up Organization

This is not a giant catch-all bag. It is sized for service work where clean organization matters more than raw bulk, and the closed-top design helps keep your loadout protected while you move from stop to stop.

• 18 internal pockets help separate tools and small gear
• Zippered two-way access pocket is reachable from inside or outside
• Internal volume is 480 cubic inches or 7.9 liters

What’s in the Box

• (1) Veto Pro Pac SP-LD closed-top tool pouch
• (1) Removable tool pouch
• (1) Removable drill holster
• (1) Rear 9-Pocket panel
• (1) Front Tool panel

Additional V-SWAP panels are available and sold separately.

Key Specifications

Height	13 in
Width	13.5 in
Depth	8.5 in
Weight (Empty)	4.8 lbs
Internal Volume	480 cu in / 7.9 L
Max Payload	25 lbs
Internal Pockets	18
Made In	United States

Compatibility

V-SWAP Panel System

Built around the V-SWAP interchangeable panel system. Includes a Rear 9-Pocket panel and Front Tool panel, with additional panels sold separately.

Drill Fit

Removable drill holster is designed to carry drills from 12 volt to 18 volt.

Built For

Electrical HVAC Maintenance Service Work Low Voltage Plumbing Service Ladder Work Mobile Troubleshooting

Pro Tip

Set up one removable side pouch as your ladder kit and leave the main bag staged below. That way the SP-LD keeps your full loadout organized, but you are only carrying the tools you need when space is tight.

Warranty & Support

5-Year Limited Warranty.

Tool Nut’s Take

Tool Nut’s Take

Veto Pro Pac SP-LD Closed Top Tool Pouch for Techs Who Hate Wasted Motion

This is a smart service bag for guys who want real organization, weather resistance, and the ability to carry a smaller kit when the full bag would just get in the way.

• Who it’s for: Service electricians, HVAC techs, maintenance crews, and anyone bouncing between rooms, ladders, and troubleshooting calls.
• Why it stands out: The removable tool pouch and drill holster are the big deal here, and the V-SWAP panel system makes the bag more adaptable than a fixed-layout pouch.
• Worth knowing: This is a compact bag, not a bulk hauler. If you carry a heavy install loadout all day, step up in size. If you want a cleaner service setup, this one is right in the pocket.

Common Questions

• Is this an open tote or a closed-top bag? It is a closed-top tool pouch with a top-down flap and a zippered two-way access pocket.
• How much weight can the bag carry? The listed maximum payload is 25 pounds.
• Will the drill holster fit compact cordless drills? Yes. The removable drill holster is designed for drills from 12 volt to 18 volt.
• Does it support interchangeable panels? Yes. It uses the V-SWAP interchangeable panel system and includes a Rear 9-Pocket panel and a Front Tool panel.